Home Network Community > All Threads > [HELP] Converting LAN to WAN
< All Threads

[HELP] Converting LAN to WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[HELP] Converting LAN to WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[HELP] Converting LAN to WAN
[HELP] Converting LAN to WAN
2023-11-08 07:43:44
Model: TD-W8961N  
Hardware Version: V4
Firmware Version:

(Totally a beginner here)

 

I want to connect this device to another router to get Wi-Fi access to my room. I know that using a CAT6 cable I can connect it. But the problem is this router has only LAN ports. 

I found this thread How to configure TD-W8960N's LAN port work as WAN port(TD-W8960N work with cable modem) | TP-Link France and I was wondering if I could do the same to this device. The problem is the user interface shown in the thread is no longer here, and I am having quite some difficulties finding the correct settings in the new UI. If you could please explain to me what I can do to convert or any better option, it will be very helpful.

 

  0      
 
  0      
 
#1
Options
1 Reply
Re:[HELP] Converting LAN to WAN
2023-11-08 11:54:21

  @Xoraz 

 

Hi, the TD-W8961N doesn't support wireless router mode, thus it has no WAN port or LAN/WAN port.

If you are going to connect it to another router instead of bridge modem, you could use LAN port on it to configure it as an access point, here is the guide:

How to setup a TP-Link DSL modem router as an Access Point

 

Note: even though the web interface looks different as well, but main steps are the same, that is to customize your wireless settings, change LAN IP address within the main router and then disable DHCP Server.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1207

Replies: 1

Related Articles
Converting LAN port to WAN port
1734 0
Need help no one could solve
685 0
HELP Tp-link td-w8961n reboots everyday and switch back to bridged mode
7518 0
ping and lag [ PLZ HELP]
642 0
hello help me resolve my problem
306 0
Speed drops on router help
1659 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.