Home Network Community > All Threads > Ax53 in AP mode reverting to 100mbps
< All Threads

Ax53 in AP mode reverting to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ax53 in AP mode reverting to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ax53 in AP mode reverting to 100mbps
Ax53 in AP mode reverting to 100mbps
2023-10-25 20:54:18
Tags: #Access Point Mode #Network Connectivity
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.2.2 Build 20230627 rel.39033(4555)

Hi,

 

I got an AX53 router that i have been only using in AP mode, but recently even though the link is with a cat6 cable and it does connect at 1Gbps at first but after a while it revers to 100mbps connection and wifi gets capped so i need to restart it, then it is working again at 1gbps.. but soon after reverts to 100mbps.

 

I tried other cables also but the same problem, tired different LAN ports, same. Restarted modem everything but problem consists.

  2      
 
  2      
 
#1
Options
8 Reply
Re:Ax53 in AP mode reverting to 100mbps
2023-10-26 09:11:31

  @Nbz 

 

Hi, when the AX53 router is used as AP mode, its WAN port should be connected to your main router, LAN ports connect to computers etc., since you mentioned WiFi gets capped, please confirm if it is the WAN port of AX53 reverts to 100Mbps after working on 1Gbps for some time, or both WAN port and also LAN ports?

 

Please also share with us screenshots of the negotiation speeds if possible.

 

In addition, what is the model no. of the main router? and if you connect a computer to the same port of the main router, then monitor for some time, will it also change from 1Gbps to 100Mbps?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-10-26 21:48:58

  @Sunshine 

 

Hi,

 

Yes i would like to confirm that the AX53 WAN port is connected to main router(Magenta Home Box; Technicolor; FGA2233) and after a reboot, or unplugging and plugging back the RJ45 into the main router, i get a 1Gbps link, but then it reverts to 100mbps. I tried different cable, also tried using different port but for no use, it does revert to 100mbps after a while so i dont think that specific port is the problem my PC is on 1gbps speed in whatever port i plug it in. The Magenta Home Box is working fine, every other device is stable at 1Gbps(besides my NVR that isn't gigabit).

 

tplink ax53

 

  0  
  0  
#3
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-10-27 01:58:07

  @Nbz 

 

Thank you very much for those information, to assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later.

 

Please pay attention to your email box for follow-up.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-10-27 06:35:57

  @Sunshine 

 

Thank you.

  0  
  0  
#5
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-10-30 03:40:31

  @Nbz 

 

You are welcome, and please let the community know if there is any update.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-11-28 08:39:53

TP Link support, I have the same issue at my place too.

 

I have 2 other TpLink routers, AX73 and C1200. Both work fine and run on 1Gbps but AX53 runs on 100Mbps only. For me I tried unplugging the LAN cable and putting in another port on AX53 device still same always 100Mbps. Cable is Cat6 so no issue there. Both the other TPLink routers work at 1Gbps.

  0  
  0  
#7
Options
Re:Ax53 in AP mode reverting to 100mbps
2023-11-30 09:30:08

  @shkshr 

 

Hi, may I have the topology of your whole network? are the three routers in the same network?

For the AX53 issue, you mean the LAN port or WAN port running on 100Mbps only? Please share with us the screenshots.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:Ax53 in AP mode reverting to 100mbps
2024-01-22 20:41:15
Hi There, I have very same issue. Cat6E cable and on wan port it went down to 100Mbit for no reason.
  0  
  0  
#9
Options

Information

Helpful: 2

Views: 1543

Replies: 8

Tags

Access Point Mode Network Connectivity
Related Articles
Archer AX53 in AP mode no connection on random devices
2279 0
MESH in AP Mode on Archer AX53 v1.0
20 0
Auto WIFI channel on AX53
554 0
C80 speed capped at 100mbps in ap mode
329 0
AX23 keeps reverting from 1gbit connection to 100mbps
522 0
Archer AX53 drops connection frequently
1309 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.