Home Network Community > All Threads > Deco x50-PoE 802.3af injector or passive tplink injector.
< All Threads

Deco x50-PoE 802.3af injector or passive tplink injector.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco x50-PoE 802.3af injector or passive tplink injector.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco x50-PoE 802.3af injector or passive tplink injector.
Deco x50-PoE 802.3af injector or passive tplink injector.
2023-10-06 10:17:19 - last edited 2023-10-06 10:18:52
Model: Deco X50 - PoE  
Hardware Version: V2
Firmware Version:

Hi,

 

Quick 2 questions.

 

First:

 


Original power supply output of x50-PoE in europe is rated 12V / 14,5W.

I know that 802.3at standard that is requierd by x50-PoE, but it covers also 802.3af standard its power limit is 15,5W.

Im wondering if I'm on the edge of use 802.3af or i can use it without problems.

My injector (Ubiquiti U-POE-AF) is rated 48V/0.32A ?

 

Second:

 

Also have two power injectors from TP-Link EAP-245, they have no sticker with any power valies but EAP-245 is compatibile with 802.3at/802.3af and rated 12,5W.

Can I use this power injector with X50-PoE ?
 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Deco x50-PoE 802.3af injector or passive tplink injector.
2023-10-09 07:48:41

  @lacrimal 

Hi, 

Even though the IEEE 802.3af PoE standard provides up to 15.4 W， Only 12.95 W is assured to be available at the powered device as some power dissipates in the cable.

So It would be better to use  802.3at.

 

As for the POE injectors of EAP245, since there is no sticker and the power supply of 245 is lower than Deco X50-POE, it is hard to say whether they are suitable.

If it is an 802.3af injector, it couldn't either but if it is 802.3at, it would be fine.

It is worth a try since the worst result we could get is they couldn't power on X50-POE. It would not damage the Deco.

Thank you very much and best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco x50-PoE 802.3af injector or passive tplink injector.
2024-01-11 16:49:56

  @David-TP 

 

It apear to work just fine over several months by now, it was tricky to measure but after some test it looks like x50-PoE will not take more than 12W in my situation. Also PoE Adapter that I mentioned work withot issues and without additional heat.

Adapters from EAP245 was not tested at all in my case.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 911

Replies: 2

Related Articles
Deco X50-PoE & X50 Outdoor
347 0
All Deco X50-POE Off-Line
284 1
Problem of Deco x50 Poe
53 0
Egress Port Deco X50 POE
588 0
My Deco X50-poe keeps reboot
1634 1
Unable to set up NordVPN on Deco X50 PoE
400 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.