Can MR200 work as a Repeater / Extender?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can MR200 work as a Repeater / Extender?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can MR200 work as a Repeater / Extender?
Can MR200 work as a Repeater / Extender?
2023-09-15 15:44:48 - last edited 2023-10-31 15:15:16
Model: Archer MR200  
Hardware Version: V1
Firmware Version:

Can I turn my old MR200 into a repeater / extender?

 

One old post at this forum says that I can't but what is then the WDS section for?
I mean:  Archer MR200 Menu > Advanced > Wireless > Advanced Settings > WDS > Enable WDS Bridging 
( see here: https://emulator.tp-link.com/MR200%20Emulator/index.htm )
Also, may I repeat an original 2.4GHz Wifi signal in the 5GHz range or the other way round?

 

Thanks for any tips or hints.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Can MR200 work as a Repeater / Extender?-Solution
2023-09-21 02:12:07 - last edited 2023-10-31 15:15:16

  @azach 

 

Hello, new versions of MR200 don't support WDS any more, for MR200 V1, you might still have the WDS function, please follow this guide to configure it:

How to use the WDS Bridging function to extend my wireless network of Archer MR200

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
3 Reply
Re:Can MR200 work as a Repeater / Extender?-Solution
2023-09-21 02:12:07 - last edited 2023-10-31 15:15:16

  @azach 

 

Hello, new versions of MR200 don't support WDS any more, for MR200 V1, you might still have the WDS function, please follow this guide to configure it:

How to use the WDS Bridging function to extend my wireless network of Archer MR200

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
Re:Can MR200 work as a Repeater / Extender?
2023-10-31 15:16:56

  @Sunshine Thanks, it works.
Indeed, I have V1 and it worked. I have it configured as an extender.

  0  
  0  
#3
Options
Re:Can MR200 work as a Repeater / Extender?
2023-11-01 01:46:28

  @azach 

 

Thanks for the update, glad to hear that it works fine. Hope you could enjoy the internet.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2741

Replies: 3

Related Articles