Archer MR200 does not recognize Archer C7 as a repeater nor an extender.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am trying to set up Archer C7 router to be used as an extender/extender on an Archer MR200 router to no avail. I first tried it wirelessly before going wired and in both cases on Router mode since AP mode does not provide OneMesh capability..and yet and the result remained the same. But based on the logic of how a repeater /an extender operates, this scheme that i am trying to implement should basically go through.
Both firmwares are up to date. Attached in the description (thread) are the information relative to Archer MR200.
Below are the Archer C7's details:
Firmware version: 1.0.15 Build 20200628 rel.63501(4555)
Hardware version: Archer C7 v5.0 .
Attached are a couple of pictures that I do hope would give a better understanding of my issue. As one could notice in the pictures , MR200 only lists Archer C7 as a wired client but does not recognized it as a OneMesh utility, meanwhile on the other hands, Archer C7 does not even list Archer MR200 as a wired client , further more no
recognition as to being an OneMesh appliance.
All help, advices as well as opinions are highly appreciated.
Cheers.
