Home Network Community > All Threads > Archer c1200 V2 looses wan
< All Threads

Archer c1200 V2 looses wan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer c1200 V2 looses wan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer c1200 V2 looses wan
Archer c1200 V2 looses wan
2023-07-05 11:30:42
Tags: #Access Point Mode
Model: Archer C1200  
Hardware Version: V2
Firmware Version: 2.0.3 Build 20211219 Rel. 67401

Hallo, mein Router verliert andauern den Internetzugang, manchmal alle paar Sekunden. Er schreibt die entsprechenden Einträgeim Protokoll bei LED-Controller an:[ 690]

Receiver Data lenght=132

Led rule name is WAN0_ON

WAN0_ON is found

Start to Run WAN0_ON

Receiver data lenght=132

Led rule name is WAN1_OFF

WAN1_OFF is found

Start to Run WAN1_OFF

 

Der Ablauf kommt paar Sekunden. Alleine heute sind schon über 700 Zeilen im Protokoll, im Juli über 3000.

 

Der Router läuft im Accesspoint Modus per Kabel verbunden an einem Kabelmodem von Vodafone. Das Kabelmodem hat durchgängig Verbindung. 

 

Hat jemand eine Idee?

 

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Archer c1200 V2 looses wan
2023-07-06 03:36:00

  @ChriKo 

 

Hi, when the issue happens, will it always recover automatically or you have to restart the Archer C1200 to get internet again? 

Did you notice the Internet LED turns red or orange when the issue happens?

 

Besides, you mentioned that it is working on Access Point mode, please confirm if your Vodafone modem is a modem and router combined.

 

When the Archer C1200 loses internet, please connect a computer directly to your Vodafone modem via the same port and same Ethernet cable to see if the Vodafone modem still works fine.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer c1200 V2 looses wan
2023-07-06 05:13:20

Hello  @Sunshine,

 

thank you for your repley. The archer recovers automaticly und the led ist turning to orange and greeen again. The archer ist connected to a Vodafone cable modem, a Router with activated DHCP server. I have also connected an other device directly to the modem and this has a stable connection to the Internet. 

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 375

Replies: 2

Tags

Access Point Mode
Related Articles
Archer C1200 V2 randomly reboots
23344 1
VLAN Tagging on WAN Port - Archer C1200
614 0
Archer C1200 / router and access point issues
537 0
Archer T6E cannot connect to 5ghz (C1200 v2) ????
2531 0
WDS on Archer C1200 V2
8378 0
Archer c1200 wan port plugged
1650 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.