The ability to select bands are in the GUI but time to time the internet is slow and I go check the router it has changed band to something i did not select...

For me band 38 is the best and 1 is the slowest. about 100mbit on 38 and 1-5mbit on other bands...

Why is the router changing bands on its own when I checked the bands to be selected?

If i reboot it reconnects to 38 with 100% signal strength..

I discovered this was a known problem for v1 and v2 hardware and you can download beta-firmware for this to work.. But with V3 there is no firmware upgrade...?

This router was way to expensive to have this kind of issue for this kind of basic feature... 120$ in the drain?