how to use 2 powerline kit TL WPA 7617 at the same time
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Good morning,
I bought 2 TL WPA 7617 kits (2x2 CPL).
How can I use it?
the TL PA 7017 P connects to the router and only uses the 2 other TL WPA 7617.
Or can I use all 4 at the same time on the same electrical network? does it scream one powerline network or 2 powerline networks?
thank you for your enlightenment
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, you could use all the four powerline units at the same time within the same powerline network:
Connect one TL-PA7017 to your router via Ethernet cable, all the three units can be plugged into other locations to extend the network, please note that only two of them have WiFi function, for the other TL-PA7017, you could only connect wired client device via Ethernet cable.
- Copy Link
- Report Inappropriate Content
thanks for the feasibility.
concretely should they be paired? 2 by 2?
if you can describe the procedure with pictures.
thank you
- Copy Link
- Report Inappropriate Content
Hi, let's call the four powerline units as A, B, C and D, you could pair them this way:
1. Pair A and B via pair button
2. Pair A and C via pair button
3. Pair A and D via pair button
Note: For how to pair powerline units via pair button, you could refer to How to set up a new secure wireless network using Powerline ac Wi-Fi Kit by Pair button
Then all the four units will be paired and in the same powerline network. If there is any further issue, please plug all the four units into wall sockets and let us know the LED status on them, especially the powerline LED which looks like a little house.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 604
Replies: 3
Voters 0
No one has voted for it yet.