Home Network Community > All Threads > Main deco X50-POE is disconnecting from the internet
< All Threads

Main deco X50-POE is disconnecting from the internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Main deco X50-POE is disconnecting from the internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Main deco X50-POE is disconnecting from the internet
Main deco X50-POE is disconnecting from the internet
2023-05-09 06:21:11 - last edited 2023-05-09 08:26:29
Model: Deco X50 - PoE  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20230301

Hi

I have recently purchase Deco X50-POE  3-stations for my home.

The main unit is lose connectivity from internet after some time. I tried with router mode and AP mode but problem is still there.

Firmware is updated. 

 

checked logs while disconnection got this error Tue May 9 12:55:53 2023 user.notice IMPROXY: INFO[imp_verify_multicast_addr@245]: Group address 224.0.0.250 is Local Network Control Block Tue May 9 12:55:53 2023 user.notice IMPROXY: INFO[imp_verify_multicast_addr@245]: Group address 224.0.0.251 is Local Network Control Block

 

What should I do?

 

Thanks

  2      
 
  2      
 
#1
Options
2 Reply
Re:Main deco X50-POE is disconnecting from the internet
2023-05-10 03:33:16

  @ManiJuneja 

Hi, May I know your internet service provider and the model number of the main ISP router?

Have you noticed any Deco X50-POE turn red during the disconnection?

If Deco X50-POEs are powered by a POE switch, can I have the model number of the POE switch?

Is the current network topology like:

Internet--ISP modem router---POE switch---3*Deco X50-POEs

 

By the way, do you need to restart Deco to get the internet connection back?

Thank you very much.

Wait for your reply.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:Main deco X50-POE is disconnecting from the internet
2023-05-31 13:56:34

  @David-TP  I have the same thing . Main Deco X50 behind a ZTE modem ( experia box )  followed by 5 client deco's .

Fun thing is, when I set the deco to wifi router ( which is not suitable for me ) it seems to be ok, but once put in accespoint mode, the deco wil lit red

after a while and reconnects then 2-3-4-5-10 minutes later. 

 

I monitored the zte modem / router and nothing seems wrong or blocked.

TP Link netherlands said it was a zte issue, but i dont believe it, since I also tried it on a delta fiber line with different modem.

 

  0  
  0  
#4
Options

Information

Helpful: 2

Views: 592

Replies: 2

Related Articles
Deco X50-PoE & X50 Outdoor
188 0
Egress Port Deco X50 POE
527 0
My Deco X50-poe keeps reboot
1185 1
Deco X50 Poe red lights daily
802 0
Unable to set up NordVPN on Deco X50 PoE
214 1
Can the x50 PoE give power?
521 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.