Home Network Community > All Threads > ddns authentication failure with dyndns
< All Threads

ddns authentication failure with dyndns

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ddns authentication failure with dyndns

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ddns authentication failure with dyndns
ddns authentication failure with dyndns
2023-04-25 08:53:04 - last edited 2023-04-27 03:50:24
Model: Archer MR600  
Hardware Version: V2
Firmware Version: ‪1.7.0 0.9.1 v0001.0 Build 220826 Rel.58057n

 

 

Hello,

when i try to setup dynamic DNS with DYNDNS the authentication fails even with correct credentials.

What to do?

 

thank you

max53

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ddns authentication failure with dyndns-Solution
2023-04-26 14:29:26 - last edited 2023-04-27 03:50:24

  @Sunshine 

hello.

same problem.

i solved changing using NO-IP ddns .

thanks a lot for your help

by max

 

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:ddns authentication failure with dyndns
2023-04-26 03:16:16

  @max53 

 

Hi, please use the same username and password to login DynDNS website to see if it works, then double check if the domain name is also entered correctly, if so, please share with us screenshots of the DynDNS website and also the DynDNS settings page on MR600.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:ddns authentication failure with dyndns
2023-04-26 09:12:03

  @max53 

 

Hi, it seems that your DDNS provider is different, on the MR600 DDNS settings page, please select Dyndns and then click "Go to register...", you will be able to register a DynDNS domain name there and then check if it works fine on the MR600.

 

Note: Your screenshots include some private information, it is highly recommended to delete them or change your domain name/password etc.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:ddns authentication failure with dyndns-Solution
2023-04-26 14:29:26 - last edited 2023-04-27 03:50:24

  @Sunshine 

hello.

same problem.

i solved changing using NO-IP ddns .

thanks a lot for your help

by max

 

Recommended Solution
  0  
  0  
#5
Options
Re:ddns authentication failure with dyndns
2023-04-27 03:51:06

  @max53 

 

This is noted, thanks a lot for the update.

Normally the DynDNS should also work, we will do more tests on our end to see if it can be reproduced.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:ddns authentication failure with dyndns
2023-09-16 19:56:25

  @Sunshine I have the same issue. I know my credentials are correct. I can log into the DynDns website and verify the host name is correct. When I save it in my axe5400 it has instantly says "connection failed" I saw mention of special characters being an issue in the password for tplink connecting to DynDns but that's a requirement in modern passwords. 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 947

Replies: 5

Related Articles
DynDNS DDNS Support
7725 0
Authentication failure on W8970
579 0
CHAP authentication failure
1257 0
DDNS authentication failed NOIP
685 0
Using custom DynDNS host provider for DDNS
845 6
DDNS Issue on MR600
3164 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.