Home Network Community > All Threads > xc220-g3v v2.30 VOIP registration Failure
< All Threads

xc220-g3v v2.30 VOIP registration Failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

xc220-g3v v2.30 VOIP registration Failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
xc220-g3v v2.30 VOIP registration Failure
xc220-g3v v2.30 VOIP registration Failure
2023-01-17 22:55:25 - last edited 2023-05-11 05:58:27
Tags: #VoIP
Model: General Product  
Hardware Version: V2
Firmware Version: 1.2.0 0.8.0 v6062.0 Build 220907 Rel.7774n

Dear Team , 

XPON Model : XC220-G3v v2.30

Firmware Version:1.2.0 0.8.0 v6062.0 Build 220907 Rel.7774n
Hardware Version:XC220-G3v v2.30 00000000


Issue : I could not register the telephony service, though I tried all troubleshooting methods shared in the tp link customer support forum and my configurations are correct as it is working fine with other XPON router used for troubleshooting purposes.
Could you please help in resolving the telephony registration issue.


Note: If i configure only telephony without internet service , telephony registered success and works fine . If I enable both internet and VOIP service it means it failed to register the account and it gives the register a fail response code(502). 

ISP Service Provider: BSNL
XPON : EPON Configured.

Expecting your solution ASAP.

 

Sample Logs: Hidden telephone number as X

 


 
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:xc220-g3v v2.30 VOIP registration Failure-Solution
2023-01-24 00:13:28 - last edited 2023-04-07 02:47:27

  @Chinnasamy 

 

 

i got a datacode firmware (Datecode2301051715)  from TPlink support post upgrade which solved the VOIP problem and internet is also working fine for BSNL.

 

kindly email to support.in@tp-link.com to get firmware & Engineer support.

Recommended Solution
  11  
  11  
#9
Options
10 Reply
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-18 03:50:59

  @PrakashSankar 

Hi, you could check whether the "Bound Interface" under VOIP registration is set to be via "LAN"

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#2
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-18 10:21:11

  @David-TP 

 

Hi David ,

 

Checked it was configured at Interface of VOIP Vlan of ipoe automatically.

 

Changed as per your suggestion to LAN interface , still issue is same.

 

When i delete the VOIP VLAN Service configuration and re-add the VOIP Service VLAN registration become success , but after succuss status if we initiate outbound call or inbound call is not received and automatically then telephony service status goes disabled.

 

 

Thanks David.

 

 

  0  
  0  
#3
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-18 17:15:20

  @PrakashSankar I am also facing exact same problem with XC220 router. 
 

Unable to register to "tn-ftth-ims-bsnl-in" SIP proxy with valid credentials. Same works fine in DSL routers. 

  6  
  6  
#4
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-19 02:17:23

  @PrakashSankar 

Thank you for getting back to me.

XC220-G3V is also an ISP-customized version, have you also checked with ISP if any additional settings are required for both GPON and VOIP services?

 

Chinnasamy, Hi, May I know what kind of DSL routers you refer to, something like Archer VR2100V?

Do you have both GPON and DSL services?

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-19 04:45:42 - last edited 2023-01-19 04:49:25

 

  @David-TP Sorry David, it was a typo, I was referring to https://www.amazon.in/Digisol-DG-GR1321-300Mbps-Wi-Fi-Router/dp/B07R8LGM45 router. With this router we are able to connect both broadband and VOIP connection. 

 

Just for FYI, I had a long AnyDesk screen share configuration sessian with ISP technician (BSNL FTTH), They tried to configure a VOIP with valid configurations, But from this router the SIP registration always fails with 502 (Bad gateway)  

 

We are getting SIP Proxy gateways IP from the service.

 

 

 

  5  
  5  
#6
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-19 14:29:35

  @PrakashSankar 

 

Hi David 

 

Good Day , Verified configurations from ISP are correct as i tested the services individually.

 

Like if we configure only VOIP services VLAN as same in above screen shot of Mr chinnasamy  without internet service , telephony works perfectly fine but we don't get internet  that shows there is no issue at ISP end as it works fine

 

If we configure internet and VOIP vlan both , internet is working fine and also VOIP gets its Dynamic IP and its gateway , DNS but telephony account registration failure  occurs because of that VOIP service becomes unavailable.

 

Could you suggest if there is any solution or if we have any beta firmware upgrade for this version would be a great help from your end.

 

 

Thank you David :) 

 

 

  1  
  1  
#7
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-23 13:57:45

  @David-TP Do we have any update on this? We are not able to use this router with BSNL ISP. 

 

@PrakashSankar 

  0  
  0  
#8
Options
Re:xc220-g3v v2.30 VOIP registration Failure-Solution
2023-01-24 00:13:28 - last edited 2023-04-07 02:47:27

  @Chinnasamy 

 

 

i got a datacode firmware (Datecode2301051715)  from TPlink support post upgrade which solved the VOIP problem and internet is also working fine for BSNL.

 

kindly email to support.in@tp-link.com to get firmware & Engineer support.

Recommended Solution
  11  
  11  
#9
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-24 08:07:38 - last edited 2023-04-07 02:47:23

  @PrakashSankar I already sent a request to support.in@tp-link.com before even this thread was created, but there was no response from them. 

 

If possible, can you share the firmware with chinnasamymca[at]yahoo[dot]com 

 

Thanks,

Chinna

  1  
  1  
#10
Options
Re:xc220-g3v v2.30 VOIP registration Failure
2023-01-27 04:51:01

  @PrakashSankar please send firmware on 

abhu.sawant@gmail.com.

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 3883

Replies: 10

Tags

VoIP
Related Articles
xc220-g3v v2.30 VOIP one-way audio
1041 0
XC220-G3v v2.30 higher Firmware Version
936 0
XC220-G3v Provisioning Failure at Intelbras 8820G
986 0
TP-Link XC220-G3v v2.30 power
759 0
TP-Link XC220-G3v v2.30 datecode 2301051715 firmware required
414 0
In TP-LINK XC220-G3v module, BSNL voip config is not Registering.
337 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.