Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Best configuration for mesh in vr600 and deco

< All Threads

Best configuration for mesh in vr600 and deco

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Best configuration for mesh in vr600 and deco

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MotazAlia

2022-10-26 16:16:47 - last edited 2022-10-26 19:40:50

Posts: 13

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-08-06

Best configuration for mesh in vr600 and deco

2022-10-26 16:16:47 - last edited 2022-10-26 19:40:50

Tags: #OneMesh

Model: Archer VR600

Hardware Version: V3

Firmware Version:

Hey guys

I was wondering will I lose performance if I kept

My vr600 " ac2100 " with no wifi and only Lan to my deco m5

Or should I connect vr600 with the mesh on deco m5

I rather use the deco interface it's more convenient

And the app is way nicer for me to use deco as access point only

1 Accepted Solution

terziyski

LV7

2022-10-26 19:17:22 - last edited 2022-10-26 19:40:50

Posts: 7001

Helpful: 5211

Solutions: 1148

Stories: 7

Registered: 2013-10-12

Re:Best configuration for mesh in vr600 and deco-Solution

2022-10-26 19:17:22 - last edited 2022-10-26 19:40:50

@MotazAlia

There's two options in your case and keep your existing VR600:

1. Keep VR600 in DSL modem router mode and set Deco in AP mode.

2. Set VR600 in bridge mode and use the Deco as a main router.

In both cases you can disable VR600 wireless radio to avoid any interference, and in both cases you'll avoid the double NAT in your network.

You can choose an apropriate one according to your environment.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2022-10-26 19:17:22 - last edited 2022-10-26 19:40:50

Posts: 7001

Helpful: 5211

Solutions: 1148

Stories: 7

Registered: 2013-10-12

Re:Best configuration for mesh in vr600 and deco-Solution

2022-10-26 19:17:22 - last edited 2022-10-26 19:40:50

@MotazAlia

There's two options in your case and keep your existing VR600:

1. Keep VR600 in DSL modem router mode and set Deco in AP mode.

2. Set VR600 in bridge mode and use the Deco as a main router.

In both cases you can disable VR600 wireless radio to avoid any interference, and in both cases you'll avoid the double NAT in your network.

You can choose an apropriate one according to your environment.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

Best configuration for mesh in vr600 and deco

Best configuration for mesh in vr600 and deco

Information

Voters 0

Tags