VR600, please configure your DNS server manually

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR600, please configure your DNS server manually

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR600, please configure your DNS server manually
VR600, please configure your DNS server manually
2019-12-24 22:01:01 - last edited 2019-12-25 03:34:45
Model: Archer VR600  
Hardware Version: V1
Firmware Version: 0.4.0 0.9.1 v0057.0 Build 170308 Rel.62615n

Hello expert, I've bought a VR600 router 2 years ago and I often have an issue: internet is intermittent also if all led on modem (wifi and line) are properly powered on.

I tried to do diagnostic and the result is Please configure your DNS server manually. I did It but the issue is still there. Please can you help me? Router is almost unusable.

My nation is Italy and my ISP is TIM. I also setting up a specific channel for wifi instead auto config.

Thanks in advance

 

  0      
  0      
#1
Options
5 Reply
Re:VR600, please configure your DNS server manually
2019-12-25 03:37:08

@MattiaM 

 

Hello, please this article to do some troubleshooting first and provide us with the information needed. 

https://community.tp-link.com/en/home/forum/topic/176410 

 

And then we will be able to do further analysis and find a solution. 

 

Thanks in advance. Merry Christmas. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:VR600, please configure your DNS server manually
2019-12-26 11:14:54

@Kevin_Z 

 

Hi Kevin_Z,

 

thanks for your quick answer, below information requested

 

  • Firmware Version:0.4.0 0.9.1 v0057.0 Build 170308 Rel.62615n 
     
  • Hardware Version:Archer VR600 v1 00000000 
     
  • I changed manually the DNS (as indicated in the error message)

 
 

  • I'm in Italy and my ISP is TIM, 8Mbps bandwidth paid. Here a speed test

     
  • Symptoms of the intermittent connection: internet connection doesn't work both in wifi or cable mode woth the error message "Please configure your DNS server manually" on the router main page. Sometimes rebooting or switching off the router the issue seems to be solved but it usually reappears in a few minutes. Thinking about a wifi channel problem I tried to change the SSID name and the channel but the issue is still there. Here a screenshot of DSL advanced setting when the router is working correctly
       

 

Let me know if you need more information!

 

Many thanks

 

Sincerly,

Mattia

 

  0  
  0  
#3
Options
Re:VR600, please configure your DNS server manually
2019-12-27 00:28:14 - last edited 2019-12-27 01:52:13

@Kevin_Z

 

and this is the DSL advance setting when router is not working (DNS error)

  0  
  0  
#4
Options
Re:VR600, please configure your DNS server manually
2019-12-30 08:38:13

@Kevin_Z 

 

Hello,

 

I sent to you all information requested few day ago, do you have any news or there are not solution to my problema?

 

Many thanks

 

Mattia

  0  
  0  
#5
Options
Re:VR600, please configure your DNS server manually
2020-01-02 01:17:34

@MattiaM 

 

Hello, sorry to respond late. We tried to do a test at our end but not able to duplicate the same issue. 

 

Back to your case, it is suggested to enable bandwidth control to give it a go. Below is the instruction: 

https://www.tp-link.com/support/faq/2176/ 

Note: The model mentioned is different, while the steps are the same. 

 

Please set the total Downstream/Upstream Bandwidth lower than the actual bandwidth you paid. 

 

And then you can add your devices into the controlling rules if possible. 

 

May it help and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 4284

Replies: 5

Related Articles