Home Network Community > All Threads > Using AX11000 with Sky ultrafast
< All Threads

Using AX11000 with Sky ultrafast

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using AX11000 with Sky ultrafast

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using AX11000 with Sky ultrafast
Using AX11000 with Sky ultrafast
2022-05-20 13:41:09
Model: Archer AX11000  
Hardware Version:
Firmware Version: As purchased

Hello,

I am in the UK and I bought the Archer AX11000 after reading all the reviews to improve my wifi and internet at home. I bought an MT992 modem as the connection is G.Fast and the service provider is SKY.

How do I get it to connect to the internet? The signal is great through the modem but I cannot get the router to accept it. Please can somebody tell me what I am doing wrong?

  0      
 
  0      
 
#1
Options
1 Reply
Re:Using AX11000 with Sky ultrafast
2022-05-23 07:46:52

Hello @Shaygee2 

 

Do you have internet access when you connect the MT992 modem directly to your computer? If yes, you should be able to connect the AX11000 to it. If you haven't tried this, please confirm this first as we can verify if there is any restriction or limitation on your line. If there is no internet access on the computer when the MT992 modem is connected directly, there might be restrictions on your line and it is suggested to contact your ISP Sky to release any binding.

Please refer to the below troubleshooting guide to confirm some basic settings again on the AX11000 if the internet is working fine when the MT992 modem is connected to your computer directly:

What should I do if I cannot access the internet through Wi-Fi router?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 506

Replies: 1

Related Articles
AX11000 and sky
1247 0
Connection to sky ultrafast
555 0
Sky Ultrafast Plus using TP Link VR2800
1512 0
Archer vr2800 and sky Ultrafast
849 0
NowTV/Sky Broadband - Setting up Archer AX11000 Router with Archer VR2100 in Bridge Mode
2068 0
AX11000 OneMesh? Where is it?
4403 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.