Home Network Community > All Threads > Slow website loading through wired connection from Deco M9 Plus
< All Threads

Slow website loading through wired connection from Deco M9 Plus

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Slow website loading through wired connection from Deco M9 Plus

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Slow website loading through wired connection from Deco M9 Plus
Slow website loading through wired connection from Deco M9 Plus
2021-02-10 22:17:28
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.4.3

I have 3 Deco M9 nodes in AP mode.

 

Node 1 (connected to my ISP modem/router by wire),

Node 2 (wirelessly connected to Node 1),

Node 3 (connected to Node 1 by ethernet backhaul).

I have a desktop PC connected to the free ethernet port on Node 3. PC connection status shows a 1Gb connection.

 

Wifi seems to be working fine in general.

 

Loading websites through this setup on my desktop (connected to Node 3 by ethernet) is annoyingly slow. A speedtest does not show anything suspicious (50mb down, 5 mb up, as is my internet plan, and 8ms ping which is also fine). A ping to 1.1.1.1 gets me 50ms the first try, later turning to 10ms.

Now, a direct connection from my desktop pc to my ISP modem/router, using the same ethernet cable that runs from Node 1 to Node 3 gives me snappy response while browsing. What's off?

 

Way back in the days, I'd change the DNS server for this behaviour. But with the Deco's in AP mode, the DNS server used is set in my ISP modem/router. If the problem lies there, it should also happen when using the UTP cable directly to my ISP modem/router.

 

Any suggestions would be appreciated.

  2      
 
  2      
 
#1
Options
5 Reply
Re:Slow website loading through wired connection from Deco M9 Plus
2021-05-12 07:10:16 - last edited 2021-05-12 07:28:32

@Jan81 

Hi,

Was this computer the only device that had this issue?

--If yes, May I Know the model number as well as the operating system, the adapter information of this computer?

Would using a different browser make any difference?

Thank you very much.

 

update: I saw you also posted another post about the desktop with Deco M9 plus and the wireless adapter is Archer T4U

https://community.tp-link.com/en/home/forum/topic/251934

Please feel free to let me know whether this issue continued;

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:Slow website loading through wired connection from Deco M9 Plus
2021-05-12 07:31:17 - last edited 2021-05-12 07:32:43

@TP-Link 

 

Hi,

 

Yes, this was the only PC that had this problem at the time. However, plugging in the ethernet cable to a different desktop that was normally connected wirelessly gives the same result. Browsers make no difference.

 

Both cases are Windows 7 machines, using the onboard Realtek Ethernet adapter. A Realtek PCI GBE Family on the secondary PC and a Realtek Fast Ethernet 8111E on my main system.

 

Re Archer: I think the Archer blew itself up (upon re-plugging it I had a BSOD and now the adapter seems dead), so in a weird way that's sorted now :)

  0  
  0  
#3
Options
Re:Slow website loading through wired connection from Deco M9 Plus
2021-05-13 06:43:04

@Jan81 

Thank you very much for the update.

So currently, the Slow website loading only affected the Ethernet connection and if the same device is able to connect via Wi-Fi, the website uploading is ok?

Did it matter which Deco the Windows laptop is connected to?

 

Thanks a lot.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:Slow website loading through wired connection from Deco M9 Plus
2021-05-13 11:57:55

@TP-Link 

 

[quote]So currently, the Slow website loading only affected the Ethernet connection and if the same device is able to connect via Wi-Fi, the website uploading is ok?[/quote]

 

Correct!

 

[quote]Did it matter which Deco the Windows laptop is connected to?[/quote]

 

There is only 1 node connected by ethernet (well apart from the first one ofcourse). I did not try to connect to Node 0 by wire yet. I did exchange nodes, setting up the network allover again. That gave me the same problem.

  0  
  0  
#5
Options
Re:Slow website loading through wired connection from Deco M9 Plus
2021-05-14 06:22:04

@Jan81 

Thanks so much for sharing all the detailed info, this issue you are experiencing sounds unusual/abnormal. To address the issue and try to fix it, we would like to have a specialist look into this further via email. Please check your mailbox later, and let us know if the issue is resolved.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#6
Options

Information

Helpful: 2

Views: 814

Replies: 5

Related Articles
Website Not loading
677 0
Website is not loading
1078 0
No Website loading
574 0
Slow Wired speed and wireless
114 0
Slow wired connection
858 0
Website not loading when using AES
692 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.