Port Forwarding for Xbox

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Port Forwarding for Xbox

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port Forwarding for Xbox
Port Forwarding for Xbox
2020-11-01 13:42:05 - last edited 2022-10-11 10:11:31
Model: Archer A20  
Hardware Version: V5
Firmware Version: 0.9.1 4.16 v0001.0

Hi I've been trying to Port forward my Xbox One but keep running into an error code 'error: 4937'. and then followed by 'The IP address is not in the same subnet with LAN IP address. Please input another one.'

 

I don't really understand what I am doing and any help would be appreciated. 

 

Thanks

  0      
  0      
#1
Options
1 Reply
Re:Port Forwarding for Xbox
2020-11-26 05:42:06 - last edited 2022-10-11 10:11:13

@MagnusAusar 

 

Hello, 

 

Please refer to the below troubleshooting guide to check some basic settings again:
Why port forwarding feature is not working on my router?

 

If still no help, please provide the below details:
1. What is the WAN IP address of the A20? And what is your detailed network layout, how are the modem and routers are connected?
2. Ensure the IP address for the Xbox One is in the same IP subnet of the A20, that's to say, if the default IP address of the A20 is 192.16.8.0.1, the IP for the Xbox One should be 192.168.0.x, please confirm this on your Xbox One.

3. Use the WAN IP+port number on a LAN PC to test if the port is opened. If this access failed, it might be your ISP has restrictions on the port/service and you need to confirm with this. Additionally, we strongly suggest you turn off the firewall on the Xbox One as some devices' firewall blocks connection from WAN by default.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 763

Replies: 1

Related Articles