Home Network Community > All Threads > Can I add static routing together with WDS Bridging
< All Threads

Can I add static routing together with WDS Bridging

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can I add static routing together with WDS Bridging

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can I add static routing together with WDS Bridging
Can I add static routing together with WDS Bridging
2020-08-31 08:30:45
Model: Archer C7  
Hardware Version: V2
Firmware Version: 3.15.3 Build 180114 Rel.39265n

I have my Archer C7 WiFi router configured with the 2.4G band in WDS bridging mode to the service provider DSL modem/WiFi router. However, the service provider does NOT let me configure the DHCP/DNS on their router, so I have disabled DHCP on their router and run the DHCP server on my Archer C7. 

 

Normal clients work fine and I get coverage all through the house––except one. I need to configure STATIC ROUTING on the Archer C7 with a DIFFERENT DNS server for the internal network. I do NOT have access to this setting on the service provider router. 

 

Even though it is set to 2.4G WDS bridging mode, my Archer C7 is configured to run the DHCP server for all clients on the network. Is there a way to configure the Archer C7 to also do STATIC ROUTING for all internal WiFI clients on the network BEFORE it hits the service provider router?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Can I add static routing together with WDS Bridging
2020-08-31 09:21:05

@mixelles 

 

Hi,

 

What is the IP address of this C7 and how about the DHCP server setting on it? Kindly show us the screenshot, thanks.

 

Meanwhile, please tell us the IP address of the DNS server which is in your local network. You may try to set the DNS server on the C7 to your own DNS server and see if that helps.

 

Thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Can I add static routing together with WDS Bridging
2020-09-07 07:33:17

@Kevin_Z Here is an outline of the basic config

 

external modem/WiFi router:

- WAN: PPPoE to service provider, DNS servers set by service provider

- LAN: 192.168.1.1 

- DCHP disabled

 

C7

- WAN: disabled

- LAN: manual IP address on the same subnet, 192.168.1.254,

- DHCP: enabled, with DNS set to customer external DNS servers 

- WiFI: 

  - 2.4GHz: WDS Bridging Enabled, link to 2.4Ghz on on the external modem/WiFi router

  - 5Ghz: standard config 

- Static Routing

  - Destination Network: [example 1.1.1.1] 

  - Subnet Mask:255.255.255.255, 

  - Gateway Addr: [ what do I put here??? ]

 

My goal is to add static routing to the C7 Router, which then uses then DNS servers configured on the C7. This usually works when the gateway address is the ipAddr of the C7 and the C7 is routing traffic through the WAN port. But in this case, I'm using WDS bridging and the traffic is routed thorugh the SP WiFi/Router WAN port. If I use the SP Router as the gateway, then I have no control over the final DNS servers. If I use the LAN address of the C7, nothing happens because it's not the router, right?

 

Is there a way to get this done?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 828

Replies: 2

Related Articles
Can I add static routing over tun0 VPN interface?
2542 2
Can I add static routing over tun0 VPN interface?
1031 0
Archer VR600 - Static Routing cannot add
576 0
Archer C7 can't update firmware when WDS Bridging is on
1134 0
Cannot find WDS bridging config on Archer C7
9243 0
WDS Bridging
1088 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.