Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Archer C7 can't update firmware when WDS Bridging is on

< All Threads

Archer C7 can't update firmware when WDS Bridging is on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 can't update firmware when WDS Bridging is on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dominiqued

2022-01-24 15:47:04 - last edited 2022-11-18 11:13:49

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-04-12

Archer C7 can't update firmware when WDS Bridging is on

2022-01-24 15:47:04 - last edited 2022-11-18 11:13:49

Model: Archer C7

Hardware Version: V5

Firmware Version: 1.2

Hi,

when the WDS Bridging is running, (this router is an extension of my main network. The wan port is not used), and I want to validate if my C7 router has an update, I have the message that there is no internet. All devices connected to this router have internet access (lan and wifi port). Do I have to put a static route or a particular setting so that the router is able to go on the internet and thus do its updates?

1 Accepted Solution

terziyski

LV7

2022-01-24 22:29:29 - last edited 2022-11-18 11:13:49

Posts: 7001

Helpful: 5211

Solutions: 1148

Stories: 7

Registered: 2013-10-12

Re:Archer C7 can't update firmware when WDS Bridging is on-Solution

2022-01-24 22:29:29 - last edited 2022-11-18 11:13:49

@Dominiqued

This is a known issue when using WDS.

Since the router WAN port isn't connected, the automatic FW update check won't work as well as getting time automatically from the Internet.

But you can always do that manually (Case 1) from the Archer C7 FW page.

Just make sure that you're using the correct FW region and HW version stated on the bottom sticker - check this link for details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2022-01-24 22:29:29 - last edited 2022-11-18 11:13:49

Posts: 7001

Helpful: 5211

Solutions: 1148

Stories: 7

Registered: 2013-10-12

Re:Archer C7 can't update firmware when WDS Bridging is on-Solution

2022-01-24 22:29:29 - last edited 2022-11-18 11:13:49

@Dominiqued

This is a known issue when using WDS.

Since the router WAN port isn't connected, the automatic FW update check won't work as well as getting time automatically from the Internet.

But you can always do that manually (Case 1) from the Archer C7 FW page.

Just make sure that you're using the correct FW region and HW version stated on the bottom sticker - check this link for details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

Archer C7 can't update firmware when WDS Bridging is on

Archer C7 can't update firmware when WDS Bridging is on

Information

Voters 0

Tags