No reconoce SIM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No reconoce SIM

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No reconoce SIM
No reconoce SIM
2020-08-25 17:31:44
Model: Archer MR200  
Hardware Version: V4
Firmware Version: 1.6.0.0.9.1 v0001.0

Until yesterday the internet worked, but today it stopped working. I have tested the SIM on other devices and it works perfectly. I have tried to restore it from the factory and it does not work either. It simply does not work, the only thing that gives an error is: unknown failure

  0      
  0      
#1
Options
3 Reply
Re:No reconoce SIM
2020-08-28 02:09:44

@cretamal 

Good day.

Can I have a picture of the error message of unknown failure?

How long have you had the device?

And if the IP address on the picture still here, please go to advanced>network>LAN settings>change the DNS server to 8.8.8.8/8.8.4.4, then restart the router(power off then power on.)

Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:No reconoce SIM
2020-08-28 20:41:07

Good afternoon

Do what is requested and it does not work.
The router is 1 year old

 

 

  0  
  0  
#3
Options
Re:No reconoce SIM
2020-09-09 03:43:02

@cretamal 

Good day.

Thank you for your time and patience.

Have you tried to test with a different sim card to have a look?

Please also try to manually input the APN settings to see if that helped;

And if possible, please also try to make sure the firmware is up to date:

Archer MR200(EU)_V4_200526

https://static.tp-link.com/2020/202006/20200628/Archer%20MR200(EU)_V4_200526.zip

By the way, where are you located?

Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 575

Replies: 3

Related Articles