Home Network Community > All Threads > Slow connection on router tp-link Archer c5400 v2
< All Threads

Slow connection on router tp-link Archer c5400 v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Slow connection on router tp-link Archer c5400 v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Slow connection on router tp-link Archer c5400 v2
Slow connection on router tp-link Archer c5400 v2
2020-06-02 20:18:56 - last edited 2021-04-06 01:06:18
Model: Archer C5400  
Hardware Version: V2
Firmware Version: 1.2.5 Build 20190411 rel.52981(4555)

I just upgraded my internet to a faster connection 1000Mbps download and 1000Mbps upload.

In the routers buildin speedtest it is testing the speed to around 210Mbps download and 200Mpbs upload.
On my computers i can succeed getting my speed up to 300Mbps download and 350Mbps upload on some servers using speedtest.net and if i am using fast.com i can get it a bit higher still not enough.


And when i connect to the cable directly before/without the router i get a much higher speed around 700-800 (which is not enough but that is my isp's job to fix that and they will send a technician to fix that part in a couple of days).

I have seen on another forum a downgrade of the firmware has fixed the problem i am just hoping for another solution.

Hope you can help.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Slow connection on router tp-link Archer c5400 v2-Solution
2021-03-10 03:51:17 - last edited 2021-05-08 08:27:06

Hi @Anders-i and all,

 

If you have ever encountered any speed issue with the Archer C5400 V2, please ensure first you are already on the latest firmware version which can be found and downloaded from the TP-Link official website:

https://www.tp-link.com/support/download/archer-c5400/#Firmware

 

If the speed is still not good as compared with that you can get from the ISP modem directly, log into the web interface of the C5400 and go to Advanced->QoS, manually set the speed to that you get from your ISP, and leave QoS on Standard, then reboot the router and confirm the speed again.

 

Let the community know if you still have inquiries, thanks a lot~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#6
Options
10 Reply
Re:Slow connection on router tp-link Archer c5400 v2
2020-06-03 03:22:32

@Anders-i 

 

Sorry to hear the speed is not as good as expected, please help verify some details and we will try to fix it together:

 

1. Please ignore the Speed Test on the router itself as it may not be precise due to some inner settings like QoS, so we will troubleshoot from the speed tested by speedtest.com or fast.com which is 300-400Mbps.

 

2. How did you test this speed via the router? Did you disconnect all the other devices from it and only leave one computer performing the test? How about the wired/wireless negotiation speed on that computer? Please verify it by referring to the instruction: https://www.tp-link.com/support/faq/2265/

Note: For wired negotiation speed, it is the same; while you need right click on local area connection or ethernet. 

 

3. Besides, you can refer to the instruction below to narrow down the issue. 

What should I do if internet speed is slow when the device is connected to the TP-Link router?

 

Thanks in advance, and have a nice day. 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:Slow connection on router tp-link Archer c5400 v2
2020-06-03 10:17:51

@Solla-topee 


1a. I will ignore the Speed test on the router then even tho i think it is a bit weird to add a feature on the router if its not working.
1b. Now you mention the QoS i have a feeling that the QoS has something to do with slow speed since i tried to play around with and got a bit higher speed tests. Is it possible to turn it off?

2. I had everything else connected on the network when i made my speed test but nothing on the network was downloading or uploading anything. Atleast not more than 1MB/s (8Mbps). All my test was on wired connection with cat6 cable on two different computer with same results. The negotiation speed on the computers wired connection is 1.0Gbps.

  0  
  0  
#3
Options
Re:Slow connection on router tp-link Archer c5400 v2
2020-09-01 15:27:38

I have the C5400 v2 with the latest stable firmware, 1.2.5 Build 20190411 rel.52981(5553).  I had to go into the QoS section of the Advanced tab on the home page of the router setting menu to manually edit the Total Bandwidth entry to 900 Mbps down and 20 Mbps up for my supposedly 600mbps Xfinity service.  At the wall of the house it was around 880 and at the modem it was around 680 or so.  Now, I get anywhere from 620 to 690.  No beta firmware required. 

 

There is a button on the Basic tab of the Network Map page named Speed Test.  When I tested, it would register no more than 315/12 and that is what showed up automatically in the Total Bandwidth entry in both the QoS  Application Priority page and Device Priority page.  When I manually edited the QoS Application Priority page entry to 900/20, the bandwidth restriction to both my wired and wireless devices went away.  It also automatically changed the entry in the QoS Device Priority page to match so that I didn't have to make duplicate entries. 

 

Hope this helps... 

 

  3  
  3  
#4
Options
Re:Slow connection on router tp-link Archer c5400 v2
2020-09-02 01:50:59

@mikengail 

Hey thanks that actually bumped my speeds up a bit but still think the QoS lowers the speed over time but lets see. 
Thanks i really appreciate your answer! :)
 

  0  
  0  
#5
Options
Re:Slow connection on router tp-link Archer c5400 v2-Solution
2021-03-10 03:51:17 - last edited 2021-05-08 08:27:06

Hi @Anders-i and all,

 

If you have ever encountered any speed issue with the Archer C5400 V2, please ensure first you are already on the latest firmware version which can be found and downloaded from the TP-Link official website:

https://www.tp-link.com/support/download/archer-c5400/#Firmware

 

If the speed is still not good as compared with that you can get from the ISP modem directly, log into the web interface of the C5400 and go to Advanced->QoS, manually set the speed to that you get from your ISP, and leave QoS on Standard, then reboot the router and confirm the speed again.

 

Let the community know if you still have inquiries, thanks a lot~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#6
Options
Re:Slow connection on router tp-link Archer c5400 v2
2021-04-02 12:25:43

@Kevin_Z 
Sorry for the late reply..
The firmware (https://static.tp-link.com/beta/2021/202103/20210309/ArcherC5400_V2_210309.zip) upgrade you suggested worked for me...
But why can i only get the firmware from you and not from the website?

  0  
  0  
#7
Options
Re:Slow connection on router tp-link Archer c5400 v2
2021-04-06 01:06:12

@Anders-i 

 

The firmware we provided previously is not officially released yet, you will get an official version in the near future.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:Slow connection on router tp-link Archer c5400 v2
2021-05-02 06:01:34
Any news on when this firmware will be officially released? Also, is the previous beta firmware link above compatible with the US version of the router? I want to try it to see if it will also fix my internet slowdown issue but the BIN in the zip has EU and not US so just checking before I mess up my router.
  0  
  0  
#9
Options
Re:Slow connection on router tp-link Archer c5400 v2
2021-05-07 02:40:38

@Beck22179  Yes, this version is also working on the US hardware, you can update it and check if the slow down issue will be resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:Slow connection on router tp-link Archer c5400 v2
2021-08-03 16:49:07

@Anders-i So I had the same issue. Newest firmware improved things a bit but the trick for me was to, under system tools, turn on NAT boost. Doubled the speed I was getting. Now I'm getting 590 on a 600mb connection. I believe this works because when you enable it it disables use of QOS.

 

Hope it helps people.

 

W.

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 4253

Replies: 10

Related Articles
Setting up the TP-Link Archer C5400 with BT
1240 0
Slow internet on Archer C5400
406 0
Archer C5400 V2 Internet speeds dropping to 200MB/s
2966 0
no share maps with openVPN and TP Link Archer C5400
201 0
Cannot Bind Archer C5400 to a TP-Link ID
1634 0
DLNA problem Archer C5400 V2
2257 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.