Home Network Community > All Threads > Archer AX6000 VPN not working
< All Threads

Archer AX6000 VPN not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX6000 VPN not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX6000 VPN not working
Archer AX6000 VPN not working
2020-05-21 19:41:39
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.0.7 Build 20191203 rel.80781(5553)

Hi Guys I'm having troubles with my router.

It really has been issue after issue since I bought it.

 

First the Wifi wasn't working properly so I updated the firmware to a Beta version that supposedly fixes the instability. It's better now, but not as stable as I would hope.

 

But what concerns me the most is that the Openvpn server it's not working, or at least i can't connect to it.

 

I've generated the certificate and exported the configuration. I've uploaded the config file to my Viscosity client (the one I use to connect to every openvpn server) and It doesn't work.

 

Additional info.

 

1) OpenVPN server:

Port-> 1194 , VPN/Subnet ->10.8.0.0 , NetMask -> 255.255.255.0

 

2) I can ping the router. 

 

If I nmap port 1194 it shows as closed

 

If I enable dmz on one of my home IP's and nmap to port 80 (that specific server is running nginx) it shows as open

 

 

Does anybody have the same issues?

 

If you require further info, please ask.

 

thanks a lot!

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:Archer AX6000 VPN not working
2020-05-21 21:14:40

As an update.

 

I Created a dummy server on my home machine with the port 1194 and added my ip as DMZ.

 

After that and from a VPS I was able to do a wget.

 

For me that shows that  The ISP isn't blocking the connection (I have my ISP modem/router in bridge mode, so the AX6000 gets the public IP)

 

As far as I can tell there's something wrong with the Openvpn server on the router or at least I'm missing some configuration

 

Also, I updated the firmware to: 1.0.7 Build 20200212 rel.7095(5553)

 

Any ideas?

  0  
  0  
#2
Options
Re:Archer AX6000 VPN not working
2020-06-01 18:18:05

any updates on this?

  0  
  0  
#3
Options
Re:Archer AX6000 VPN not working
2020-06-22 18:05:32

Do this forums get checked by tp-link support?

 

I've tried everything I can think of to make the VPN work.

Right now I'm using a RPI3 to have a vpn server, since the one in the router does not work.

 

Could anyone from tp-link give me a hand?

  0  
  0  
#4
Options
Re:Archer AX6000 VPN not working
2020-06-24 00:27:47

Still waiting for some feedback from tp-link

  0  
  0  
#5
Options
Re:Archer AX6000 VPN not working
2020-06-24 01:53:29

@heimdall 

 

Hello, apologies for not picking up your inquiry timely.

 

Please help verify some details and we will try to figure it out:

 

1. Kindly check the below VPN setup instructions again to confirm all the settings on the AX6000 are correct:

How to use OpenVPN to access your home network through the Wi-Fi Routers

BTW, please also provide us your network topology.

 

2. If the above guide doesn't help, please tell us what is the WAN IP address of the AX6000 and it is suggested to configure the DDNS:

How to set up TP-LINK DDNS on TP-Link Wireless Router?

 

3. Please check the VPN Tunnel: login the web interface, and on the VPN Server-> VPN Connections, we can see the status of the VPN Server, confirm if there is a VPN connection enabled. If not, which means the VPN setup is not successful.

 

4. Check whether you've set block ICMP from LAN port: we will block the ICMP from different LAN subnets by default, so if you don’t uncheck it, it will block this session.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2918

Replies: 5

Related Articles
Archer AX6000 2.4GHz not working
1043 0
Archer AX6000 2.4 GHz not working
6007 1
AX6000 No VPN Client
13207 3
TP LINK ARCHER AX6000 NO L2TP VPN SUPPORT
1715 0
OneMesh for Archer AX6000
3022 1
Archer AX6000 OneMesh
2496 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.