TL-WPA4220 - WiFi functionality hangs after a day or so

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-WPA4220 - WiFi functionality hangs after a day or so

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220 - WiFi functionality hangs after a day or so
TL-WPA4220 - WiFi functionality hangs after a day or so
2020-02-08 04:16:54 - last edited 2020-12-08 08:09:54
Model: TL-WPA4220 KIT  
Hardware Version: V4
Firmware Version: 4.0.3 Build 20190326 Rel.43406

Hi,

 

I have a problem with WiFi functionality. After a day (sometimes later, sometimes earlier) WiFi network disapears. eg. is no working and any device can see it anymore. The connection through ethernet cabel  is still working. So it's something wrong with WiFi functionality I guess. If you plug-off and plug-it again, it strats working. Constantly reboot the device is not a solution in my case.

I see many users post the same issue here for weeks(!) with no helpful reaction :-(.

Have you got any solution?

Firmware version: 4.0.3 Build 20190326 Rel.43406

Hardware version: TL-WPA4220 v4.0

 

TP-LINK Team, could you be so kind and advise what should I do to use your product?

  1      
  1      
#1
Options
1 Accepted Solution
Re:TL-WPA4220 - WiFi functionality hangs after a day or so-Solution
2020-12-08 08:09:43 - last edited 2020-12-08 08:09:54

 

Hi, All.

Thank you very much for your continuous concern about this case.

Recently, we had several feedbacks that once TL-WPA4220 updated to the latest firmware, the internet connection would be very unstable such as not connecting to the Wi-Fi, and/or the Wi-Fi just disappearing.

If you had a similar issue, we suggested that you could roll back to the previous firmware: https://static.tp-link.com/2020/202010/20201030/TL-WPA4220_180308.zip  to have a look.

And if it did not make any difference, please feel free to update here or send me a private message.

 

Thanks a lot.

Recommended Solution
  2  
  2  
#12
Options
14 Reply
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-02-11 09:47:14

@Gajowy 

 

Hello, we will do some troubleshooting to locate this issue and try to fix it.

 

1. What is the led status of the TL-WPA4220 when the wifi disappeared? Especially the wifi led.

 

2. Have you ever tried to turn off the wifi function and re-enable it by holding the wifi buttom?

 

3. Please ensure that the firmware is the latest one, and you can change the wireless settings to give it a go, including wireless channel and channel width.

Note: You can use the tpPLC utility to do that; instruction attached: https://www.tp-link.com/en/support/faq/1611/

 

Besides, may I know when did you buy this powerline adapters?

 

Best regards.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-03-18 08:08:03 - last edited 2020-03-18 08:13:12

Hi, the same happens to mee too.

 

I am working from home. I have two laptops and a phone connected to the device.

At some point all suddenly lose connection, and the device itself is not reachable from the network.

 

I have to unplug it and plug it again in the poiwer socket.

 

I get quite annoyed especially because it also happened several times during video sessions I need to keep with my team.

 

@Support Any clue? I need to have this working. Otherwise I will have to change to another kind of adapter.

 

Thank you.

 

EDIT: I suspect it has to do with concurrent connections from multiple devices bringing the device into hanging.

  0  
  0  
#3
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-03-18 09:48:41

@Sero 

 

Could you please provide more information asked on my previous reply? 

 

And have you ever tried to do some troubleshooting? What are they and what about the corresponding results? 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-03-18 10:00:05 - last edited 2020-03-18 10:00:33

Yes, with TPLink support. After long session they said it might be a hardware issue, so I should send the unit to warranty testing. Instead I shall buy another adapter, probably av1200. The kit I have was bought from another country. Cheers.

  0  
  0  
#5
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-04-26 15:23:34

@Gajowy 

 

I have the same problem. I use the WPA4220 (EU) for my smartphone to listen broadcast. After minutes or longer, until hours the Internetconnection (datatraffic) is stopped.

New firmware 20190326 Rel 43406 changed nothing. Even if I connect an extern WiFi-accesspoint devise on the LAN-port, it is the same.

The WPA4220 (EU) -device was bought in 2019.

 

 

  0  
  0  
#6
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-04-27 10:18:06

Hi @KrM49 ,

 

I have solved the issue with support from TP-link, they privided me with a firmware (marked as 4.0.3 Build 20180920 Rel.57814) that solved the problem in my case.

I would suggest you contact them by email or chat and point them to this conversation, along with your description of the issue.
 

Good luck!

Sero

  1  
  1  
#7
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-09-12 16:05:34 - last edited 2020-09-12 16:06:24

@Gajowy I have just spent an hour on TP-Link chat without a fix. Does anyone know how to get hold of Release 57814? The person I was chatting with went though a standard checklist that went round in circles.

 

  0  
  0  
#8
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-11-30 14:55:34
Hi, I am also experiencing this issue. Same hardware and firmware. I have two units where one is hanging daily or sometimes twice a day. Strange thing is that the issue seem to be related to the position of the unit. After several attempts I must conclude that if I swap the unit on floor 2 and 3 the issue always remains on floor 2 !!! The unit on floor 2 are closer to the adapter at the router and always report better data rates (309 vs 236 Mbps). Hence I do not think it is a hardware issue. After continuous ping testing and network analysis with WireShark I suspect some kind of memory management issue in the current firmware version. I typically see a scenario where ping response time increase, unit becomes unavailable to the tpPLC app, WiFi clients will failover to the working unit on floor 3 and finally it stops to respond to the ping requests and becomes unreachable. Plug-off / plug in immediately resolve the issue. I have register a ticket and requested the "4.0.3 Build 20180920 Rel.57814" firmware. Kind regards,
  0  
  0  
#9
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-11-30 15:05:55

@TeamT Thanks for your contribtuion. I am resporting to truning off and on.

  0  
  0  
#10
Options
Re:TL-WPA4220 - WiFi functionality hangs after a day or so
2020-12-07 19:54:52

@Stephen.Cowley I got 4.0.2 Build 20180308 Rel.37064 and it solved my issue. It has at least been running for more than three days now.

  2  
  2  
#11
Options

Information

Helpful: 1

Views: 3931

Replies: 14

Related Articles