Archer T4U V2 "crashes" when i connect to 5 GHz but works fine with 2 GHz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Dear TP-Link community
I have recently purchased a TP-Link Archer T4U V2.
Every time I boot my computer (Windows 10 64 bit) I have issues connecting to my 5 GHz network. It is difficult to describe the issue as it feels like the adapter "crashes" when I try to connect. Sometimes it works after 3-4 times but other times I have no success.
I have tried to delete the driver which didn't work. Furthermore, I tried to use the CD that came with my T4U but the software didn't fix it either. Lastly, I tried to download the driver from the website but that didn't work either.
2Ghz works fine and if I finally succeed connecting to 5 GHz the connection is stable.
I have recorded a video that shows the issue: https://streamable.com/u6nzn
I hope that you can provide me with some insight on how to fix this issue.
Best regards
Daniel
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
From the video attached, once you booted your computer and try to connect to the 5GHz, it shows connecting but then no wifi network detected, it will appear again in seconds but still failed to connect to 5GHz; while if you connect to the 2.4GHz first and then reconnect to the 5GHz, it seems it is connected but then the it is connected to 2.4GHz again.
And I found that the signal strength of 5GHz is unstable, sometimes it is one bar, sometimes it is 3/4 bars. So we can do some troubleshooting first.
1. Try to move the computer closer to the router and ensure that it can obtain good signal strength from 5GHz.
2. Try to change the wireless settings of the 5GHz on the main router to improve its performance like wireless channel and channel width.
3. If it failed to connect to 5GHz, try to remove the profile and reconnect to it.
4. Try to find the driver from the manufacturer's website with the chipset, which is Realtek RTL8812AU.
May it help.
- Copy Link
- Report Inappropriate Content
From the video attached, once you booted your computer and try to connect to the 5GHz, it shows connecting but then no wifi network detected, it will appear again in seconds but still failed to connect to 5GHz; while if you connect to the 2.4GHz first and then reconnect to the 5GHz, it seems it is connected but then the it is connected to 2.4GHz again.
And I found that the signal strength of 5GHz is unstable, sometimes it is one bar, sometimes it is 3/4 bars. So we can do some troubleshooting first.
1. Try to move the computer closer to the router and ensure that it can obtain good signal strength from 5GHz.
2. Try to change the wireless settings of the 5GHz on the main router to improve its performance like wireless channel and channel width.
3. If it failed to connect to 5GHz, try to remove the profile and reconnect to it.
4. Try to find the driver from the manufacturer's website with the chipset, which is Realtek RTL8812AU.
May it help.
- Copy Link
- Report Inappropriate Content
Hi Kevin
Thank you very much for your suggestions. I appreciate you taking your time to help me.
However, none of your suggestions have helped. I will try to return my adapter and purchase a new one as the same issue happen when I try to use the adapter on my laptop.
Best regards
Daniel
- Copy Link
- Report Inappropriate Content
I see, sorry for that; you can return it and get a new one first and test its performance.
Any further problem, just be free to let us know.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2575
Replies: 3
Voters 0
No one has voted for it yet.