Archer C20 V4 5Ghz wifi is not working for some devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Archer C20 V4 5Ghz wifi is not working for some devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
i brought a this router yesrter day and i started 5Ghz it shows it has turn on that band but on my phone Nokia 8.1 and Samsung Galazy S9 could not get that frequency and that was not showing there... i took that to my customer care but they told me that its a bug of firmware some phone dont get that frequencey so he cant do anything... does anyone face this kind of issue and does anyone solve this issue please help me..
Thanks in Advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for your reply;
We have had some feedback that some smart phone supports band 4 of 5GHz only in Bangladesh, from 149-165, while the Archer C20 supports band 1 of 5GHz only, from 36-48.
So it is suggested to verify whether the 2 smart phones do not support band 1 of 5GHz, instead, it supports band 4 only.
Nice day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ArcherC8 wrote
Many devices only operate on the 2.4 Ghz and not the 5Ghz. You need to check each device's specs.
thanks brother for reply... actually my both phone supports 5ghz band i tested with other router and TP link C60 also but this C20 cant give me this wifi :(
- Copy Link
- Report Inappropriate Content
On your device, try deleting (forget) the 5 Ghz network and then reestablishing it. Also remember that the 5Ghz does not have the WIFI distance that 2.4Ghz has however it is generaly faster. When you get near the edge of the WIFI covered area, the position of the router and the anteneas make a difference.
- Copy Link
- Report Inappropriate Content
Please ensure that the 5GHz wifi led is lit up, and can it be detected by other wireless devices?
For the 2 phones, you can verify the channel used by the 5GHz detected by them or you can contact their tech support to confirm the 5GHz channel supported.
Meanwhile, what is the country version of the Archer C20 which can be found on the bottom label?
And where are you located?
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The router should be working fine if the 5GHz can be detected by other devices.
Have you ever tried to change the wireless channel of the 5GHz to verify whether it can be detected?
Meanwhile, the customer support said there is a firmware issue, did they provide more information?
And where are you located?
Besides, you can contact the tech support of the 2 smart phones to get some help.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for your reply;
We have had some feedback that some smart phone supports band 4 of 5GHz only in Bangladesh, from 149-165, while the Archer C20 supports band 1 of 5GHz only, from 36-48.
So it is suggested to verify whether the 2 smart phones do not support band 1 of 5GHz, instead, it supports band 4 only.
Nice day.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
Thanks for your reply;
We have had some feedback that some smart phone supports band 4 of 5GHz only in Bangladesh, from 149-165, while the Archer C20 supports band 1 of 5GHz only, from 36-48.
So it is suggested to verify whether the 2 smart phones do not support band 1 of 5GHz, instead, it supports band 4 only.
Nice day.
Thanks for reply... May be u find out that problem cause..my phones can get archer c60 wifi 5ghz but not my own c20... But i just wanna know is that problem can be fixed? Does firmware update help me in this case? Or i should need to change that router?
Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 14000
Replies: 15
Voters 0
No one has voted for it yet.