Configuration Guide How to set up Ethernet Backhaul with your Deco devices
Ethernet Backhaul is a feature that makes it possible to wire the Deco units together to optimize the bandwidth and network stability.
Normally, after wired Deco units with an Ethernet cable, the Ethernet backhaul will take effect automatically.
Typical connection structures for Ethernet Backhaul
QA
Q1: Which switch models support Ethernet backhaul?
Most of the switches on the market support Deco's Ethernet backhaul feature. If you don’t have a switch or if your switch is verified not compatible with Deco Ethernet Backhaul, the following models will be a good choice:https://www.tp-link.com/home-networking/all-soho-switch/
Q2: To use the Ethernet Backhaul feature, do I need to wire all my Deco units?
Nope. The following network layout works as well.
Q3: How do I know if Ethernet Backhaul takes effect?
Q4: Why my satellite Deco's signal source shows "Wi-Fi" instead of "Ethernet" in the Deco app even if the main Deco and the satellite Deco are connected to the same switch?
Please refer to the suggestions on this link:Ethernet Backhaul not working
Q5: Why my Deco units become unstable once they're connected via a switch?
The Deco Ethernet backhaul feature is based on the standard IEEE 1905.1 protocol. However, we find that some switches, mainly the D-Link switches, will not forward packets based on IEEE 1905.1 protocol, causing all Deco units in a network loop and becoming quite unstable, you might consider changing another switch or contacting switch’s support directly. TP-Link Switches are mostly compatible with our Deco’s Ethernet backhaul.
Q6: Can I set up different Deco models such as M5 and M9 Plus together through Ethernet backhaul?
Yes, just configure and add different Deco models in the same Deco network. After that, you can wire them to set up the Ethernet backhaul connection.
You could refer to the link to learn how to add different Deco models in the same network.
Q7: Can I use one Ethernet port on the Deco for Ethernet backhaul and the other to connect a computer?
Yes. For more details, please refer to How to use Ethernet Ports on Deco?
Q8: Can I use a pair of powerline adapters to build Ethernet Backhaul, like Main Deco---master Powerline adapter~~~extended Powerline adapter---satellite Deco?
Yes and please keep in mind that the Ethernet Backhaul speed now will depend on both the Ethernet cable quality and Powerline rate.
Related Article: General questions about Ethernet Backhaul feature on your Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Does anyone happen to know whether the wired backhaul can be achieved through TP-Link Powerline adapters?
I'm looking to install Deco M5s for my home and was wondering if I could recycle some Powerline adapters to provide the Ethernet backhaul.
At the end of the day, it would just be using the house ring main as a 'cable', so even though there's Powerline circuitry at the entry and exit points, it's still got to be a viable/preferable alternative to just relying on the WiFi signal, correct?
Darren
- Copy Link
- Report Inappropriate Content
Many thanks for making the sincere effort to explain this. Thanks for this wonderful article! great post with rich quality content! Very resourceful and informative! Keep posting! Would love to follow up on your upcoming future posts!
Come visit sites betting sportsbook's trusted 2019 namely BEINCASHBOLA. So lets daftar judi bola or create account with us.
- Copy Link
- Report Inappropriate Content
Yeah! What a great blog you have published. I am really impressed by a work that is full of high artistic values like this, continue your work because we feel that your work is very helpful for many people.
HOT NEWS for bettor sportsbook's lover, Now available situs judi bola Indonesia best and trusted 2019 namely mncbolasport.com.
- Copy Link
- Report Inappropriate Content
Bettingligafox.com is agen judi bola terpercaya an opportunity for you to join in and enjoy all the facilities that have been provided. In the participation of members to play football bets in it, so that the services we have become trust in members. Situs agen bola online terbaik Providing services is not only limited to being used, but how when members play will get satisfaction and comfort.
- Copy Link
- Report Inappropriate Content
I´m having this problem as well. At home I have CAT6 cables running to the points where I would like to place the Deco units. The cables are connectet to a dlink switch (a old one). It didnt work. I got a red led indication on the deco unit. Out of wifi range.
Will it work with the TP-Link 5-Port gigabit Desktop Switch TL-SG1005D Version 8?
- Copy Link
- Report Inappropriate Content
Better ditch your dlink switch. Switched mine for a tp-link one and all problems disappeared.
Joao_Aroeira wrote
I´m having this problem as well. At home I have CAT6 cables running to the points where I would like to place the Deco units. The cables are connectet to a dlink switch (a old one). It didnt work. I got a red led indication on the deco unit. Out of wifi range.
Will it work with the TP-Link 5-Port gigabit Desktop Switch TL-SG1005D Version 8?
- Copy Link
- Report Inappropriate Content
The main article was posted in the YEAR 2017, In question 3 stated a firmware will release on the capability to view the ethernet backhaul and NOW IT'S already YEAR 2019 and we've yet to get any updates or see anything close.
May I know what are you guys doing? and how can a firmware development takes 2 years or more with no significant updates?
- Copy Link
- Report Inappropriate Content
ok i found the documtation for Deco M5 I am running CentOS just having issues with binding IP it bound to localhost LOL not the network card.
Same issue for me. OC200 just arrived, powered by 5 volts microusb and connected to my router. chinese cuisine
Also after 20 minutes no connection to cloud but the most warning thing is that i cannot retrieve its ip address. My router doesn't lease any ip.
Tested also with another router but nothing change.
Model: OC200(UN) v1.0
- Copy Link
- Report Inappropriate Content
Hi,
OC200 is used to manage EAP device, not Deco. Deco can be managed by Deco APP only.
Besides, do you have any EAP devices? Meanwhile cause it is a business product, you may need post on business community to get some help.
Good day.
- Copy Link
- Report Inappropriate Content
Internetworker wrote
The main article was posted in the YEAR 2017, In question 3 stated a firmware will release on the capability to view the ethernet backhaul and NOW IT'S already YEAR 2019 and we've yet to get any updates or see anything close.
May I know what are you guys doing? and how can a firmware development takes 2 years or more with no significant updates?
Hi,
We are sorry for the inconvenience, while as you know, it will take time to test and modify the new firmware and its performance/capacity , our engineers are working on it right now.
Please keep an eye on our official website/deco app or contact us for more info.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 17
Views: 478800
Replies: 402
Voters 14
