Archer MR200 Cisco AnyConnect passthrough
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
Hi,
I have a MR200 with a 4G connection. I am using Cisco AnyConnect Secure Mobilty Client for VPN connections to an office. It connects but doesn't receive any traffic/packets. Not much is showing in the MR200 logs.
If I use my 4G connection using a USB dongle or using my iphone as a hotspot, etc, it works fine, so it's not the mobile operator with an issue. It's definitely the MR200.
All VPN passthru options are enabled on the MR200 so should be allowing traffic.
Any thoughts? Any other logs to see what could be getting blocked?
C
@chrisaxe21 "Let's hope TP-Link add this to a general release."
The release log of the second-latest firmware (Archer MR200(EU)_V1_160905 published 2016-09-05) suggests this issue being fixed: "1.Fixed the bug that the PPTP/L2TP VPN connection is not stable."
However, I observe that even with the latest firmware (Archer MR200(EU)_V1_180502), L2TP pass-through (enabled in the settings) does not work (it does with the same SIM on other devices):
Sun Feb 9 01:57:38 2020 : IPSec connection established
Sun Feb 9 01:57:38 2020 : L2TP sent SCCRQ
Sun Feb 9 01:57:58 2020 : L2TP cannot connect to the server
Multiple forum discussions suggest trying this beta firmware (http://tp-link-support.de/firmware/Archer_MR200/Archer_MR200v1_160706.beta.IPsec.zip). However, this file is password protected (and regular login fails).
How can I access this file?