Broken RE450?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Broken RE450?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Broken RE450?
Broken RE450?
2016-07-18 17:29:34
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi,
I am using a RE450 Range Extender, now I noticed that when pinging the RE450 directly I got 0% Packetloss from each side. But when pinging to a IP on the other segment side, I got a packetloss of about 8%-44%.

It looks for me that RE450 Routing is broken? Does anyone got an idea? Device broken or something else?
Throughput is around 300mbit, ping ~2ms.
Firmware: 1.0.0 Build 20160309 Rel. 34696

Cheers,
cbug
  0      
  0      
#1
Options
3 Reply
Re:Broken RE450?
2016-08-03 17:27:36
Can you go to Internet normally? It seems there is a lot wireless interference.
  0  
  0  
#2
Options
Re:Broken RE450?
2016-08-04 17:53:07
Yes, the network is working well. I got ~27MB/s throughput using samba (udp protocol).

Paketloss only happens when RE450 has to route packets, also my ssh (tcp) sessions are stucked every few seconds for a few seconds.

Network setup as follows:
router -> (5GHz wifi 2,5meters distance) -> RE450 -> Cable -> server

ping from 10.0.0.1(router) to 10.0.0.2 (RE450) -> 0 Paketloss
ping from 10.0.0.3(server) to 10.0.0.2 (RE450) -> 0 Paketloss
ping from 10.0.0.1 to 10.0.0.3 -> 44% Paketloss
  0  
  0  
#3
Options
Re:Broken RE450?
2016-08-18 03:07:52
I got an additional issue, RE450 is unable to handle ipv6 - that sucks in 2016!!!

I am currently waiting for a dev of LEDE-project.org to build a firmware fitting RE450. My router is already running LEDE, I thought I can use the RE450 with stock firmware, too bad.

Cheers
  0  
  0  
#4
Options