Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi All

New here in the hope that someone may be able to shed some light on a problem I'm having. I can no longer get the powerline light on my AV500 powerline extender (from the TL-WPA4220 kit)

I've been successfully using 2 AV500 adapters around the home, but needed the wifi boosting in a room upstairs. So I bought an AV500 powerline extender kit (TL-WPA4220). The adaptor works fine and the extender did to start with. Until i fiddled with the settings!

Rather than have to log in to it when going upstairs, I cloned my router settings (which was not straight forward as I don't have a WPS button on my old Sky router). This however, caused problems as, wherever I was in the house, our devices were trying to connect to the signal from the AV500 extender upstairs rather than the router (i was standing in front of my router with barely any wifi signal).

I gave up on this and reset the extender and tried to reconnect using the original factory settings. That's when I find I have no green light on the powerline and, despite following the steps to connect it to the powerline it just won't do that any more. It's sending a signal out to my mobile devices (and i can see it if I connect it by a LAN cable), but it isn't getting any signal from my router through the powerline.

If anyone has any ideas or advice I'd be very grateful.

Thanks

Pete