Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi:

I am trying to use the Caller ID Function of the TPLink TM-IP5600 but it does not work. I have try to use Putty 0.65 and use the following connection parameters:

Bits per second - 57600
Data bits - 8
Parity - None
Stop bits" – 1

And sent the following commands to the modem

ATZ
AT+VCID=1

When i make a call to the line where the modem is connected it only respond:

RING

RING

RING

But it does not give me information about the telephone number that is calling. In the other hand i have test the line using a telephone with caller ID support and it Works correctly. I hope you can help me resolve this issue


Best Regards,