TD-W8970B ( Ver. 1.0 ) - Long DSL line syncing ..
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8970B ( Ver. 1.0 ) - Long DSL line syncing ..
Model :
Hardware Version :
Firmware Version :
ISP :
Recently I bought the above Wireless N ADSL2+ ( ANNEX B ) modem router and I have a DSL sync problem after booting ... it takes a long time to sync with my DSL line when in
router settings I have enabled the ADSL_2plus value in DSL Modulation type . Is this normal behavior ??
I Upgraded the firmware to it's latest TD-W8970B_V1_150526 ( published 26/05/15 ) .. the dsl line sync have better timings when I left the DSL modulation type to auto but then I have lower upstream / downstream rates and the modulation goes to ADSL_G.dmt ..
My DSL line is up to 24mbps so I want to have the modulation type to ADSL_2plus to have the best possible upstream / downstream rates ..
Hardware Version :
Firmware Version :
ISP :
Recently I bought the above Wireless N ADSL2+ ( ANNEX B ) modem router and I have a DSL sync problem after booting ... it takes a long time to sync with my DSL line when in
router settings I have enabled the ADSL_2plus value in DSL Modulation type . Is this normal behavior ??
I Upgraded the firmware to it's latest TD-W8970B_V1_150526 ( published 26/05/15 ) .. the dsl line sync have better timings when I left the DSL modulation type to auto but then I have lower upstream / downstream rates and the modulation goes to ADSL_G.dmt ..
My DSL line is up to 24mbps so I want to have the modulation type to ADSL_2plus to have the best possible upstream / downstream rates ..