WDR4300 FTP fail to access from WAN IP address
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WDR4300 FTP fail to access from WAN IP address
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
I has been enable the FTP service from my router with choose USB folder location. tested local network access the ftp://192.168.0.1 from browser and get the successful result.
-trying disconnect home wifi SSID from my laptop and choosing phone internet then try access FTP from WAN IP address but fail to connect.
-trying to telnet WAN IP address with port 21 and get fail result.
-configure router DMZ and point to 192.168.0.1 then try to telnet again and get result successful connect ftp.
-PC connect phone internet, trying browse my ftp server using WAN IP address also not able to connect.
Please help on my issue.
Hardware Version : Not Clear
Firmware Version :
ISP :
Firmware Version: | 3.14.2 Build 150331 Rel.60585n |
Hardware Version: | WDR4300 v1 00000000 |
I has been enable the FTP service from my router with choose USB folder location. tested local network access the ftp://192.168.0.1 from browser and get the successful result.
-trying disconnect home wifi SSID from my laptop and choosing phone internet then try access FTP from WAN IP address but fail to connect.
-trying to telnet WAN IP address with port 21 and get fail result.
-configure router DMZ and point to 192.168.0.1 then try to telnet again and get result successful connect ftp.
-PC connect phone internet, trying browse my ftp server using WAN IP address also not able to connect.
Please help on my issue.