tplink m7350 v3 not boot
@TP-Link
I have the same problem with the tplink m7350 v3 modem. Is it possible to send the firmware recovery tool for this version?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, welcome to our community.
If the issue phenomenon is consistent with the description in the thread, please follow suggestions in it.
If not, you may share the detailed situation about your problem for our better understanding.
Thank you and best regards.
- Copy Link
- Report Inappropriate Content
I followed the instructions, but when writing the files, two commands encountered errors. The device gets stuck on the TP-Link logo and won't boot up at all. Is it possible? Please advise what I should do to fix this problem? I will send you the errors.
fastboot flash system mdm-image-mdm9625.yaffs2
target reported max download size of 49283072 bytes
erasing 'system'...
FAILED (remote: failed to erase partition)
finished. total time: 0.012s
fastboot flash recoveryfs mdm-recovery-image-mdm9625.yaffs2
target reported max download size of 49283072 bytes
sending 'recoveryfs' (10993 KB)...
OKAY [ 0.448s]
writing 'recoveryfs'...
FAILED (remote: flash write failure)
finished. total time: 0.520s
- Copy Link
- Report Inappropriate Content
1. Are you using the original wire?if not ,try it out
2. Try other usb ports on your pc, and if possible, try another pc, “flash write failure” may be due to unstable power supply
and send all the output here,pls
- Copy Link
- Report Inappropriate Content
I followed all the steps you mentioned, but I still get the same error. When I connect the device to the computer, I hear a USB connection sound and then a disconnection sound.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 103
Replies: 5
Voters 0
No one has voted for it yet.