1043ND - 40MHz channel width

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

1043ND - 40MHz channel width

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1043ND - 40MHz channel width
1043ND - 40MHz channel width
2014-04-21 19:41:49
Region : Portugal

Model : TL-WR1043ND

Hardware Version : V2

Firmware Version :

ISP :


Good morning dear friends,

I am having some troubles to configure both the 1043ND v1 and v2 with 40MHz channel width.
I specify this width but the speed will always be the one from 20MHz, meaning with 802.11n 40MHz I get 145Mbps in the v2 and 130Mbps in the v1.
If I turn speedboost in the v2 my speed will increase to 217Mbps.

But never the full 300 or 450...

In my neighbourhood I find no routers, mine is the only one. I tried to change between 1, 6, 11, 13 channels and speed will always be 217 Mbps.
In my Macbookpro I see that MCS index is 23 and RSSI: -35/-40, so I should be able to get the full 450 or something more than the 217 which I believe is due to the 20MHz and not the 40MHz.

Does anyone have experience with this setup?
  0      
  0      
#1
Options