IPSEC MR600 + SNAT DNAT OFF

EnzoCsn

Thursday - last edited Yesterday

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-02-20

IPSEC MR600 + SNAT DNAT OFF

Thursday - last edited Yesterday

Model: Archer MR600

Hardware Version: V3

Firmware Version:

Hi,

I would like to know if it is possible to configure an IPSEC tunnel between three Archer MR600 V3s with the basic firmware version.
The three links are PPPoE fibers. Second quick question, is it possible to remove the SNAT and DNAT from the MR600?

Thank you for the response

2 Reply

Clive_A

Yesterday - last edited Yesterday

Posts: 6611

Helpful: 3360

Solutions: 1571

Stories: 0

Registered: 2023-06-09

Re:IPSEC MR600 + SNAT DNAT OFF

Yesterday - last edited Yesterday

Hi @EnzoCsn

Thanks for posting in our business forum.

You posted this thread on the wrong page. This is business forum and Omada Router page for Omada device discussion. Your model is Archer. I will move your case to the correct page.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.