Re220 Ethernet
Hi,
I have an Re220 extender. I have connect an Ethernet cable into it and the other end into a Sky Stream Puck, however I am unable to detect the Ethernet connection.
Any ideas?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Shids,
As terziyski said, please confirm whether you want to extend the router network to RE220 wirelessly or wired to confirm the appropriate working mode. The former uses the default range extender mode, and the latter uses the Access point mode.
If the TV obtains the network through the Ethernet cable, then RE220 can only use the range extender mode. If the TV has no network, please change a different Ethernet cable.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
OK, I didn't get that.
So you just have to connect the TV box to the RE220. Its ethernet port should work for wired connections out of the box.
If TV box don't get any ethernet connection try with another ethernet cable or another device to pinpoint the issue.
- Copy Link
- Report Inappropriate Content
Hi @Shids,
As terziyski said, please confirm whether you want to extend the router network to RE220 wirelessly or wired to confirm the appropriate working mode. The former uses the default range extender mode, and the latter uses the Access point mode.
If the TV obtains the network through the Ethernet cable, then RE220 can only use the range extender mode. If the TV has no network, please change a different Ethernet cable.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Shids,
If you set the RE220 to default mode(range extender), you can directly connect a PC to the RE220's Ethernet port to get internet.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 103
Replies: 6
Voters 0
No one has voted for it yet.