Early Access Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Updated on Apr 11, 2025:
The official version 1.2.3 Build 20250314 is gradually rolling out, and users can check for updates on the BE800's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Release Notes for the new official 1.2.3 Build 20250314 version:
-
Fixed an issue where traffic usage data in the Tether App was missing after setting a 2.4GHz Wi-Fi schedule.
-
Fixed a bug where 6GHz might not be seeing due to 6GHz beacon exhibit abnormal behavior.
This thread will be locked for further comments then. Please start a new thread to open discussion if you have any questions.
---------------------------------------------------------------------------------------------------------------------------------------
This Article Applies to:
Archer BE800 V1
New Features and Modifications:
This firmware introduces wireless driver enhancements for improved system stability and compatibility, along with a lot of new features, such as DoH/DoT and EasyMesh in AP mode. It's strongly recommended to upgrade to this version.
Important: Once upgraded to the 1.2.x firmware, you CANNOT downgrade back to the 1.1.x version.
New Features:
1. Upgraded wireless drivers for enhanced system stability and compatibility.
2. Newly support 3-band (2.4GHz + 5GHz + 6GHz) MLO connection.
3. Newly support EasyMesh in AP mode.
4. Newly support EasyMesh Topology Map.
5. Newly support WebUI in EasyMesh Satellite/Agent mode, providing functions like LED control, reboot, firmware upgrade, and more.
6. Newly support DoH/DoT.
7. Newly support ECO mode.
8. Newly support setting Wi-Fi Schedule separately for different Wi-Fi channels.
9. Newly support Guest network isolation from the main network in AP mode.
10. Newly support multi-selection in the Access Control allow list.
11. Newly support TAP mode in OpenVPN server function.
12. Newly support setting the client IP range of the PPTP/L2TP/IPSec VPN servers to match the main network's DHCP range.
13. Optimized traffic recognition with newly supported DPI function.
14. Enhanced system stability and security.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) This pre-release firmware for Archer BE800 V1 can be applied to all versions (EU/US/CA/AU/SG/etc.).
(5) To use the new 3-band MLO connection, both the router and client device must support Wi-Fi 7 and 3-band MLO. Please note that most Wi-Fi 7 smartphones and network adapters may only support 2.4GHz + 5GHz or 2.4GHz + 6GHz when connecting to the MLO Network.
Direct Firmware Download link:
Archer BE800_V1_1.2.1 Build 20250108 (Pre-release Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Wi-Fi Routers Support DoH and DoT Network
What is WiFi 7’s Multi-Link Operation (MLO)?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Is there any particular reason why it's locked?
https://community.tp-link.com/en/home/forum/topic/742126
- Copy Link
- Report Inappropriate Content
hey, any update to this? Been having the same issue since updating, I've noticed it happens more often when more devices are connected to it. For me with usually only around 29 devices online it disconnects or just goes extremely slow while browsing I've noticed it happens maybe every couple hours? Had family over recently and with more than 40 devices connected it seems to happen as often as every 15-30 minutes?
Keen on just waiting for the next 1.2 update but if no eta any time soon, would appreciate if I can get the file to revert back to 1.1.6 please :)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@BE800user There was a new one released today 1.2.3 Build 20250314 rel.45415(5553). I don't see it on the public website yet, but my router downloaded it and I installed it.
- Copy Link
- Report Inappropriate Content
Samsung S24 Ultra One Ui 7 (Android 15) installed:
5GHz + 6 GHz MLO works, but only 320 MHz 6 GHz is used.
As expected, 320 MHz is the limit of WiFi 7 anyway.
Also setting 6 GHz as 160 MHz bandwidth and 5 GHz as 160 MHz bandwidth, does not MLO 5 + 6 GHz to 320 MHz.
But only uses 160 MHz in 6 GHz. So MLO is rather useless as it is now. Or Samsung/Qualcomm useless, or TP-Link and others useless.
2.4 + 5 + 6, only MLO connects 2.4 GHz + 6 GHz as associated.
The phone reports 320 MHz, but uses 160 MHz 6 GHz and 40 MHz 2.4 GHz.
This is my last test for people to read. TP-Link i am sure can buy their own Samsung S24 and or S25 ultra and make them fix it for a better user experience.
My advice: Want 3.5 Gbps WiFi 7 download and upload?
Install a seperate AP in each room you want this. And get a proper WiFi 7 router/ap which can do 320 MHz bandwidth in the 6 GHz range.
TP-Link BE800 does this perfectly.
- Copy Link
- Report Inappropriate Content
Thanks,
I have installed this FW version.
Webinterface looks more bright and clean for me.
Even the IP's from my VPN provider are visible in the vpn client section.
Qnap: Thanks for this fw version.
- Copy Link
- Report Inappropriate Content
Hello @NPGrey @memzila @Onyx2024 @jp23 @TheSassyBear @rayan-johnson @pctelco @benoitm974 @mizwdev @qazwsxedc16 @gur111 @Bluefish91 @bjomol @ppredator83 @Dr_pepper @Ovidiuss @Clanchef089 @Morten199 @Zasek @Theo-Lyon @blackcatz @jwagman1 @5Guru @Postponed1 @Kajkac @szymko @Koala6613 @BE800user
The official version 1.2.3 Build 20250314 is gradually rolling out, and users can check for updates on the BE800's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
Release Notes for the new official 1.2.3 Build 20250314 version:
-
Fixed an issue where traffic usage data in the Tether App was missing after setting a 2.4GHz Wi-Fi schedule.
-
Fixed a bug where 6GHz might not be seeing due to 6GHz beacon exhibit abnormal behavior.
This thread will be locked for further comments then. Please start a new thread to open discussion if you have any questions.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 16715
Replies: 137
Voters 3
