guest and main Wi-Fi access.

guest and main Wi-Fi access.

guest and main Wi-Fi access.
guest and main Wi-Fi access.
Friday
Model: Deco X10  
Hardware Version:
Firmware Version: last


I have ROUTER MODE  a DECO x10 main and X55 secondary . the problem is that my Home Assistant server  is connected via cable  deco x10 (main network)...., 
And I connected all the LOT devices via the guest wifi network 2.4 . Now the Home assistant does not ping (does not see) the guest IP.. I suspect they're on a different VLAN. I did not find in the settings of the DECO x10  how to allow to see the main IP via Guest wifi .  or, for example, create a third 2.4 WiFi network with the main VLANs. 

  0      
  0      
#1
Options
4 Reply
Re:guest and main Wi-Fi access.
Yesterday

  @Andrei_2025 

Does your Deco support the IOT feature?  If yes, that would be the third wifi network you are looking for.

 

Could you not rename your main wifi with the name currently used by the guest wifi?  

 

 

 

  0  
  0  
#2
Options
Re:guest and main Wi-Fi access.
Yesterday

  @yves_b 
my deco x10 - no support the IOT feature ((


Yes, I can rename it for a while..and what will it give me? I don 't understand ? I'll get access to my smart devices for a while.. and then I lose access to it again? I think it's possible to add another virtual interface with guest VLAN 591 to the proxmox server, but I'm not thinking about doing this and I'm afraid))

  0  
  0  
#3
Options
Re:guest and main Wi-Fi access.
Yesterday

  @Andrei_2025 

My suggestion was to rename your main network, to avoid reconfiguring the large amount of devices using the name of the wifi network.

  0  
  0  
#4
Options
Re:guest and main Wi-Fi access.
Yesterday

  @Andrei_2025 
Clearly! It's not a bad idea!! but still, I'll look for a more correct solution)) Thanks !!

  0  
  0  
#5
Options