Wireless Repeater Mode (WDS Mode)

Wireless Repeater Mode (WDS Mode)

Wireless Repeater Mode (WDS Mode)
Wireless Repeater Mode (WDS Mode)
Wednesday
Model: Archer C80  
Hardware Version: V2
Firmware Version: C80(US)_V2.20_1.14.3 Build 241025

In Wireless Repeater Mode / WDS Mode / Range Extender Mode

 

Problem= The router working well to provide internet to other devices but itself couldn't detect the internet.

 

1. Unable to connect itself to check for update. ( Internet Not Connected)

 

2. Unable to get Time and Date from internet.

 

3.  Need a option to get time with other routers or from the router its getting the internet to repeat further, if internet not available. 1 Option is already available get time from managing device but the settings even lost after reboot its not saving this setting in memory just using temporary.

 

Therefore after every Reboot or scheduled Reboot. The Router forgets its time and set its default time of firmware released.

 

In This scenario when connected with multiple router as wireless Repeater of Different Company/Model, the Scheduled Reboot Time doesn't match and working of Internet Stop Everyday until manually Rebooted in sequence.

 

 

Because of this I need to set time everyday to work router in working condition, since it started showing no internet on wifi connected device (because of connection interference with router).

  0      
  0      
#1
Options
1 Reply
Re:Wireless Repeater Mode (WDS Mode)
Wednesday

  @John_Dew 

 

Go through this thread for how to set your C80 NTP servers in WDS mode and give it a try.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options