Hi,
I have 2 Deco X60 running in AP mode wire backhual behind mikrotik.
ISP speed: 500/500
Mirkrotik wire: 500/500
Deco wire: 500/500
Deco Wifi 5ghz: 500/300
Loop proctection and RTSP are off on Mikrotik (if both are on it will cause loop and deco units turn red)
Tried moving around, switching main unit, network optimization, 160mhz -> 80mhz, none of them make any difference.
Any ideas?
Thanks.
Hi, welcome to the community.
May I know who your internet service is?
Have you tried to change different speed test servers to see whether it made any difference?
By the way, I noticed you had the Deco for a while. Did the issue start recently?
Wait for your reply and best regards.
Hi David,
Thank you for your reply.
Recently, I've upgraded to XE75 Pro and the slower upload still exist.
Current setup, both XE75 Pro 2.5gbe ports connected to SE2109, and SE2109 is wired SFP to MIkrotik 5009.
The change is I've switched the router from Asus AC68U to Mikrtoik 5009.
I tried switching back to Asus AC68U as router without changing XE75 Pro, the wifi upload speed is back to 500mbps.
Ethernet connected to XE75 Pro has no issue to reach ISP speed.
It seems only the wifi throughput has issue.
Things I've tried and having same result.
On Mikrotik,
1. To establish wire backhaul, 1. loop protection off on the switch or 2. RSTP to None
2. MTU adjustment
3. Turning on or off with QOS
4. Firewall fasttrack on or off
On XE75 Pro,
1. Network Optimization
2. Different Placement
Helpful: 1
Views: 130
Replies: 2
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
