Deco x50 suddenly turns on solid yellow
I have two deco x50 (us) ver 1.3
One it's working fine but the other suddenly turns solid green to solid yellow in less than 10 minutes.
When it turns on solid yellow can't connect to wifi nor factory reset.
It goes back to green solid when i turn off and on back, and when it's on solid green, it works fine as a normal deco.
I tried to factory reset, reinstall other firmwares versions, switch power cables between decos but nothing seems to work
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
You may update firmware to latest 1.2.8 according to the official website.
- Copy Link
- Report Inappropriate Content
@Marvin_S Deco X50 v1.30 firmware is not working properly with connected devices...?
- Copy Link
- Report Inappropriate Content
@Marvin_S see it......????
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Marvin_S wrote
Hi, thanks for posting question here.
You may update firmware to latest 1.2.8 according to the official website.
I updated to 1.2.8 Build 20240731 but the problem persists.
I even updated to 1.2.10 Build 20241105 (similar to the other X50 that it's working fine) and the problem continues
@Chalet76
No, i'm using the original power supply.
I thought the problem was that too and switched between power supplies, but didn't solved the problem.
- Copy Link
- Report Inappropriate Content
Hi, it is suggested to swap this Deco with your main Deco X50 to confirm whether the problem still follows this Deco:
How to replace the main Deco with another Deco
You may also change different power sockets for the Deco.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 98
Replies: 6
Voters 0
No one has voted for it yet.