AX53(US) model wifi Band 4 not available for 5Ghz

Anwar786

a week ago - last edited a week ago

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-12-26

AX53(US) model wifi Band 4 not available for 5Ghz

a week ago - last edited a week ago

Tags: #Network Connectivity

Model: Archer AX53

Hardware Version: V2

Firmware Version: 1.0.4 Build 20240306 rel.66339(5553)

Hi All,

i am from bangladesh and recently bought TP link Archer AX53(US) Ver:2.0 / AX3000 router. i was able to setup the router successfully but unfortunately for the 5 Ghz connection it shows only 36-48 & 52(DFS)-128 (DFS) channels (DFS should not be used since it is reserve for radar and military use). Here in bangladesh 5GHz channel 149-157 is supported. Feeling helpless in this regard. is there any working solution for this? Is there any specific firmware which can make band-4 to work with this model?

1 Accepted Solution

Joseph-TP

a week ago - last edited a week ago

Posts: 1006

Helpful: 73

Solutions: 233

Stories: 0

Registered: 2024-06-22

Re:AX53(US) model wifi Band 4 not available for 5Ghz-Solution

a week ago - last edited a week ago

Hi @Anwar786,

Thanks for your information.

From your channel width setting, you need to change it to 80Mhz, and you should be able to see band 4.

In addition, for the purpose of protecting personal information, it is not recommended that users publicly release personal information in the community, such as invoices containing personal information and device information on the bottom label of the router. The collection of this information can be submitted to support via email.
It is recommended that you delete the invoice information and the bottom label image of the device you posted to this post.

Recommended Solution