Beta Software Deco X50-5G_V1_1.2.0 with IoT and CPU Optimization
This Article Applied to
Deco X50-5G_V1
Optimization and Bug Fixes:
- Fixed the issue of not detecting the IoT Network.
- Optimized the CPU Usage
- Improved the overall network stability.
Firmware Download Link
| Deco X50-5G_V1 | 1.2.0_build20241230_Beta(updated time 2024.1.6) |
Update Advice:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
Please feel free to comment below on how this version works. Thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I think it was like 10 seconds, but i didn't count.
Maybe you can count and share for future reference
- Copy Link
- Report Inappropriate Content
@OeKintaro No luck,I still keep getting red light after 4 seconds.I keep pressing it for 1 minute and red light stays on.In the begining it turns from yellow to green for half a second then nothing,again a green light for a second but even if I keep pressing or releasing the reset it then changes to red.
- Copy Link
- Report Inappropriate Content
@Etherovamon it wont work unless u set the static ip and dns properly, thats why u kewp getting the red light
- Copy Link
- Report Inappropriate Content
@Rushtonwolves I set on ipv4 static IP 192.168.0.2 Subnet mask 255.255.255.0 Default gateway empty Dns empty I also disabled ipv6 and all firewalls Is there something wrong?
- Copy Link
- Report Inappropriate Content
@Rushtonwolves it was the Ethernet cable.I used the one provided in the box and immediately recognized by the PC and green light after 2 seconds.Thank you anyway
- Copy Link
- Report Inappropriate Content
Hi David,
to be honest I'm really scared about the trouble management with the currently published beta and the official software as well.
You receive a lot of feedback that both softwares are very buggy and there is still no fix available.
Like a lot of other people I'm affected by the reboot issue of the X50 5G as well. Today it was five times till now.
You should really focus on a firmware fix instead of recommending a firmware recovery and provide a new (less buggy) firmware asap.
BR
David
- Copy Link
- Report Inappropriate Content
@David_Alex all the new firmware's do is add extra features which you dont really need, roll back to 1.15 an turn off auto update, it has all the features you need - cell lock being the main 1
- Copy Link
- Report Inappropriate Content
David_Alex wrote
Hi David,
to be honest I'm really scared about the trouble management with the currently published beta and the official software as well.
You receive a lot of feedback that both softwares are very buggy and there is still no fix available.
Like a lot of other people I'm affected by the reboot issue of the X50 5G as well. Today it was five times till now.
You should really focus on a firmware fix instead of recommending a firmware recovery and provide a new (less buggy) firmware asap.
BR
David
Hi, welcome to the community. It was what I did in the beginning. Later I realized the new firmware progress took longer than I expected. A quick solution to revert to the official 1.1.5/1.1.7 was a necessity. The engineers are still working on an official firmware fix and I will keep the community updated once there is further news.
For the issue you have suffered, I wish you could refer to this link to submit an email to us:
https://community.tp-link.com/en/home/forum/topic/715880?replyId=1486708
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9602
Replies: 99
Voters 1
