Early Access Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection
This Article Applies to:
Archer BE800 V1
New Features and Modifications:
- Newly support 3-band (2.4GHz + 5GHz + 6GHz) MLO connection.
- Newly support EasyMesh in AP mode.
- Newly support DoH/DoT.
- Enhanced system stability and security.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) This pre-release firmware for Archer BE800 V1 can be applied to all versions (EU/US/JP/TW/etc.).
(5) This version of software can be degraded to the previous version.
(6) To use the new 3-band MLO connection, both the router and client device must support Wi-Fi 7 and 3-band MLO. Please note that most Wi-Fi 7 smartphones and network adapters may only support 2.4GHz + 5GHz or 2.4GHz + 6GHz when connecting to the MLO Network.
Direct Firmware Download link:
Archer BE800_V1_1.1.99 Build 20241126 (Pre-release Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Wi-Fi Routers Support DoH and DoT Network
What is WiFi 7’s Multi-Link Operation (MLO)?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Onyx2024 wrote
Firmware used for a few weeks.
BE800 in AP mode wite RE800BE as satellite
I have issues with:
- MLO not extended on satellite (one MLO ssid with AP, another with repeater)
Extending the MLO Network via EasyMesh is currently not supported and our development team will continuously improve the EasyMesh implementation in future updates.
Onyx2024 wrote
Firmware used for a few weeks.
BE800 in AP mode wite RE800BE as satellite
I have issues with:
- Samba server for USB drive not visible by windows 11
Did it work before the firmware update?
How about accessing or viewing the USB drive from another computer or phone, does it work?
What is the brand, capacity, and format of the USB drive?
Onyx2024 wrote
Firmware used for a few weeks.
BE800 in AP mode wite RE800BE as satellite
I have issues with:
- My printer (only 2.5 ghz wifi) do not work properly on MLO, more stable on a simple 2.5 wifi on a third party AP.
Does the printer connect reliably to the main 2.4G network on the BE800 (not the MLO)? If so, it may not perform well with the new MLO network. In that case, it’s best to keep it connected to the main 2.4G network.
BTW, what's the brand and model of the printer?
- Copy Link
- Report Inappropriate Content
JacekS wrote
2 BE800 in AP mode, wired backhaul. When trying to enable EasyMesh on the satellite one I get the "Change to Satellite Router mode?" prompt, which I confirm, but then the "Joining..." progress bar just goes to 100% without ever finishing or any indication of an error. In the main router, the satellite one does not pop up when looking for satellite routers. Any hints?
Edit: What worked is a factory reset of the satellite router, and then trying to add it straight away from the main router.
To join the EasyMesh network, you need to factory reset the satellite router first (Just like you've already figured out).
JacekS wrote
2 BE800 in AP mode, wired backhaul.
However, discovered another issue - the LED screen settings are not synchronized. I have a custom text set up on the main router, but the satellite one still shows the default one.
This may not be supported. I will confirm with the development team.
BTW, I assume this doesn't work either on previous versions. Could you please confirm? Thank you.
- Copy Link
- Report Inappropriate Content
Kevin Is there any chance to let us use and choose different DoH servers than the preconfigured ones ?
And on MacOS Sonoma clients if the private address wifi is turned off DoH/Dot works but if the Private WiFi address is turned fixed or rotating then the DoH/DoT does not work
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 4652
Replies: 63
Voters 1