Beta Software Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Great news to Archer AX90 owners!
We are so excited to share a public beta version of firmware for Archer AX90 V1 with the community, which has added support for EasyMesh. If you're looking for a mesh solution with your existing Archer AX90, don't hesitate to upgrade and install this beta firmware to try it out.
This Article Applies to:
Archer AX90 V1/V1.20
New Features and Modifications:
- Added support for EasyMesh and Ethernet backhaul.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the BETA firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) This version of software contains important updates with EasyMesh, so it CANNOT be degraded to the previous version.
(4) EasyMesh would not be available when the router works in Access Point mode.
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) This public beta firmware for Archer AX90 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Direct Firmware Download link:
Archer AX90_V1&V1.20_1.2.0 Build 20241125 (Beta Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers?
What is EasyMesh?
What is Wi-Fi EasyMesh and how does it work with TP-Link routers and extenders?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z The main router is a Huawei HG8245H5, it does not support EasyMesh. The switches are an ienRon HG0402XG and a TP Link LS105G v1.0. Yes with my setup the network seems to remain stable when the laptop with a Realtek 8852CE doesn't attempt to connect to the network, and even when it does connect whether the AX90 reboots or not is an intermittent issue. I've tried disabling EasyMesh on the AX90 but it doesn't seem to make a difference to the stability when the laptop connects to the network.
Attached herewith are some logs: https://gist.github.com/nathanielcwm/eb3f9669820a19532bcc67a4bd74b2d5
- Copy Link
- Report Inappropriate Content
@Kevin_Z I am currently unable to reproduce the issue after changing to AP mode. Although this is an intermittent issue so there's a chance that it might occur again later.
- Copy Link
- Report Inappropriate Content
We hope for new firmware on AX95 as well, sorry about the offtopic here...
- Copy Link
- Report Inappropriate Content
nathanielcwm wrote
@Kevin_Z I am currently unable to reproduce the issue after changing to AP mode. Although this is an intermittent issue so there's a chance that it might occur again later.
Just had my first incident of the AX90 rebooting while in AP mode when the device with the RTL8852CE attempted to connect.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Is there any ETA for the stable release?
- Copy Link
- Report Inappropriate Content
@Kevin_Z How to change wireless country region ? There´s no option to change it on AP MODE and i can´t rolback the firmware.
- Copy Link
- Report Inappropriate Content
ajcorrea wrote
@Kevin_Z How to change wireless country region ? There´s no option to change it on AP MODE and i can´t rolback the firmware.
As highlighted in my original post, this version doesn't allow to be downgraded to the previous 1.1.x version since it contains important updates:
Once updated, the firmware will adaptively match the country code of your device, and there is no need to manually change the region or country.
Please be aware that this version of software doesn't support EasyMesh when it's working in AP Mode. If you still want to change to AP Mode, please follow this guidance.
- Copy Link
- Report Inappropriate Content
I knew that downgrading was not possible, but how do I change the wireless country code/region? It is currently set to United States, I need to change it to Brazil to free up some channels. Randomly when the AX90 restarts (it is using automatic channels) it may choose a channel that does not exist for Brazil, in this case, the devices cannot connect.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3794
Replies: 31
Voters 0
No one has voted for it yet.