Hello,

I just bought an Archer BE3600 because it was the only one around with two actual 2.5Gbps ports. After i finished configuring all my settings i found out that WOL is not working on my PC anymore.

What's funny is that if the PC is on and i inspect the packets with wireshark i see the magic packet coming correctly and i even put back the old router to check and from there it works so the issue is caused by the new TP Link router.

Has anyone ever encountered this issue? Does TP-link put th eports in an "offline" state somehow ?

My configuration has DHCP  static  reservations and from what i can see the ARP table has the IP associated to the MAC address but i went anyway and made a static bing from the "Security > IP & MAC Binding" Menu

Furthermore i read on some forums to try disabling the IGMP proxy but still nothing.

Powersaving is in "Normal" so i cant assume it shuts down the ports when the PC is off

Device isolation is of course off else i wouldn't be able to access my NAS, server, and other devices on the network.

At this point im pretty sure it's a firmware issue and a total deal breaker and was thinking of returning the router.