how to fix pppoe send PADI Host-Uniq ?

how to fix pppoe send PADI Host-Uniq ?

how to fix pppoe send PADI Host-Uniq ?
how to fix pppoe send PADI Host-Uniq ?
Yesterday
Model: Archer AX23  
Hardware Version: V1
Firmware Version: H-Ver = 1.20 ; S-Ver = 1.1.0 Build 20230725 Rel. 56344

2024-11-21 17:37:42 ppp[7039]: <6> 261026 pppoe send PADT due to(resending PADI)
2024-11-21 17:37:32 ppp[7039]: <6> 261021 pppoe send PADI Host-Uniq(1b7f)
2024-11-21 17:37:32 ppp[7039]: <6> 261026 pppoe send PADT due to(resending PADI)
2024-11-21 17:37:28 nat[6874]: <6> 211501 Initialization succeeded
2024-11-21 17:37:28 nat[6874]: <6> 211501 Initialization succeeded
2024-11-21 17:37:27 ppp[7039]: <6> 261021 pppoe send PADI Host-Uniq(1b7f)
2024-11-21 17:37:27 ppp[7039]: <6> 261026 pppoe send PADT due to(resending PADI)
2024-11-21 17:37:25 ppp[14405]: <6> 261066 ppp send LCP TermReq due to Peer not responding
2024-11-21 17:37:21 led-controller[750]: <6> 288051 Start to run WAN1_OFF
2024-11-21 17:37:21 led-controller[750]: <6> 288051 Start to run WAN0_ON
2024-11-21 17:37:21 led-controller[750]: <6> 288051 Start to run LAN_ON

  0      
  0      
#1
Options
1 Reply
Re:how to fix pppoe send PADI Host-Uniq ?
18 hours ago

Hi  @HONGX 

 

When you find the router send PADI Host-Uniq(1b7f), is the router's network still running normally?

If the network is unstable, you can try the following suggestions:

There are a few different cases related with unstable connection, including WAN connection unstable and wireless client devices unstable.

For WAN connection unstable (Router Internet LED turns red/orange occasionally):

    1) Connect a PC directly into your modem to verify if your ISP Internet is stable.

    2) Make sure the Ethernet cable between your modem and the Router is connected properly, replaced old cables with new ones.

    3) Change the DNS Server of the Router, login the web management interface of the Router(How to log into the web-based management interface ),  go to Advanced > Network > Internet > Advanced Settings, change the two DNS Servers into 1.1.1.1 and 8.8.8.8.

    4) Go to Advanced > System > Firmware Update to upgrade the firmware of the Router.

For wireless client devices unstable:

    1) Make sure the Router is properly placed, it should be put in open area instead of inside a cabinet or shelf.

    2) Login the web management interface of the Router, go to Advanced > Wireless > Wireless Settings, change the wireless channel into another one.

    3) For 2.4GHz wireless client devices, adjust 2.4GHz channel width into 20MHz, for 5G wireless client devices, adjust 5GHz channel width into 80MHz or 40MHz to avoid interference.

 

  0  
  0  
#2
Options