Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

< Wi-Fi Routers

TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

gatosempai

2024-11-14 23:19:39 - last edited 2024-11-14 23:26:20

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2024-11-14

TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

2024-11-14 23:19:39 - last edited 2024-11-14 23:26:20

Tags: #Network Connectivity

Model: Archer AXE75

Hardware Version: V1

Firmware Version: 1.3.1 Build 20241101 rel.60873

I have a main router Huawei(HG8145V5) from my ISP and AXE75 as secondary router wired connected. Both devices have gigabit ports and they are conected with a cat 6 cable.

The main Router provides the paid speed of 500 Mbps. My desktop connected to one of the LAN ports of Huawey gets around 400 Mbps(there is not problem to get at 500 Mbps), But if I connected my desktop to one of the LAN port of the second router AXE75, It gets around 250 Mbps - 275 Mbps. It is the max speed that gets using second router AXE75. Using a cat 6 cable to test network speed.

Any ideas what is going on?

1 Accepted Solution

gatosempai

LV1

2024-11-14 23:26:14 - last edited 2024-11-14 23:26:20

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2024-11-14

Re:TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed -Solution

2024-11-14 23:26:14 - last edited 2024-11-14 23:26:20

QoS was configured to 300 Mbps, so speed was caped to that speed

Recommended Solution

terziyski

LV7

2024-11-14 23:32:18

Posts: 7113

Helpful: 5327

Solutions: 1204

Stories: 7

Registered: 2013-10-12

Re:TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

2024-11-14 23:32:18

@gatosempai

Check if you have configured and idisable any QoS settings in the HomeShoeld feature and test again.

If this doesn't help configure AXE75 in AP mode (Case 1) and test again.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed

Information

Voters 0

Tags