Slow TX201 adapter
Hi
I have purchased a TX201 for my machine running Kali and Win7.
I was unable to make it work on Win7 due to driver signature problem ! I have tried the driver on the CD and I have also downloaded the driver from Realtek and still windows says that it cannot confirm the digital signature of the driver.
When it come to Linux-kali, I have managed to install the driver (latest version from Realtek) however it runs very slow and it's far from the 2.5G ;-)
My pc is directly connected to the 2.5Gb/s port on my provider router. So NO intermediate switches or devices. I am using a Cat8 cable. I have a 2Gbit provider link. I have tried nperf and speedtest servers and never went over 660Mb/s.
When using the 1Gb card of my PC (on board of my motherboard card) and my macbook 1G adapter using the same network configuration and same websites to test I can reach a little bit more than 900Mbit/s bandwith !
Any idea ?
Thanks in advance.
Best
Abdo
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
Thank you. I got in touch with TP-Link support. Very efficient :-)
They have resolved the issue. Thnak you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi
On Windows i had to change few settings in order to install the driver, and had to change the default parameters (of course i can send you a copy of the actual config).
On linux, had to use the driver from realtek and change the default parameters.
Best
- Copy Link
- Report Inappropriate Content
@amalac Please
- Copy Link
- Report Inappropriate Content
Here you go, I am using Windows 10. Latest Speedtest with few windows opened, browser and some backgroubd apps gave 1806,66Mbps on a 2Gbps link :
Name DisplayName DisplayValue RegistryKeyword RegistryValue
---- ----------- ------------ --------------- -------------
Eth 3 Ethernet à économie d’énergie Désactivé *EEE {0}
Eth 3 Contrôle de flux Désactivé *FlowControl {0}
Eth 3 Modération interruption Désactivé *InterruptMo... {0}
Eth 3 IPv4 Somme de contrôle hors... Désactivé *IPChecksumO... {0}
Eth 3 Cadre jumbo Désactivé *JumboPacket {1514}
Eth 3 Grand envoi hors charge v2 ... Activé *LsoV2IPv4 {1}
Eth 3 Grand envoi hors charge v2 ... Activé *LsoV2IPv6 {1}
Eth 3 Wake on magic packet when s... Désactivé *ModernStand... {0}
Eth 3 Nombre maximum de files d’a... 4 files d’attente *NumRssQueues {4}
Eth 3 Décharge ARP Désactivé *PMARPOffload {0}
Eth 3 Décharge NS Désactivé *PMNSOffload {0}
Eth 3 Priorité & VLAN Priorité & VLAN désactivé *PriorityVLA... {0}
Eth 3 Mémoires tamp de réception 4096 *ReceiveBuffers {4096}
Eth 3 Echelle coté réception Désactivé *RSS {0}
Eth 3 Vitesse & Duplex Négociation auto *SpeedDuplex {0}
Eth 3 TCP Somme de contrôle hors ... Désactivé *TCPChecksum... {0}
Eth 3 TCP Somme de contrôle hors ... Désactivé *TCPChecksum... {0}
Eth 3 Mémoires tamp de transmis... 4096 *TransmitBuf... {4096}
Eth 3 UDP Somme de contrôle hors ... Désactivé *UDPChecksum... {0}
Eth 3 UDP Somme de contrôle hors ... Désactivé *UDPChecksum... {0}
Eth 3 Réveil sur Magic Packet Désactivé *WakeOnMagic... {0}
Eth 3 Avertir lors de corresponda... Désactivé *WakeOnPattern {0}
Eth 3 Advanced EEE Désactivé AdvancedEEE {0}
Eth 3 EEE Max Support Speed 2.5 Gbps Duplex intégral EEEMaxSuppor... {2500}
Eth 3 Ethernet vert Désactivé EnableGreenE... {0}
Eth 3 Gigabit Lite Désactivé GigaLite {0}
Eth 3 Adresse de réseau -- NetworkAddress {--}
Eth 3 Power Saving Mode Désactivé PowerSavingMode {0}
Eth 3 VLAN ID 0 RegVlanid {0}
Eth 3 Arrêter Réveil par réseau Activé S5WakeOnLan {1}
Eth 3 WoL / Arrêt vitesse réseau 10 Mbps en premier WolShutdownL... {0}
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 474
Replies: 7
Voters 0
No one has voted for it yet.