M7200 and volvo still has a problem with WiFi WPA2 AES

M7200 and volvo still has a problem with WiFi WPA2 AES

M7200 and volvo still has a problem with WiFi WPA2 AES
M7200 and volvo still has a problem with WiFi WPA2 AES
2 weeks ago - last edited a week ago
Model: M7200  
Hardware Version: V3
Firmware Version: 3.0.8 Build 231007 Rel.2n

The ones proposed on this forum did not work for my Volvo XC60 II (2021, mild hybrid). Yesterday I bought a TP-Link M7200 V3.0 router in Poland, in the official Media Markt sales network. The router has the latest software 3.0.8 Build 231007 Rel.2n, which blocks the installation of other software versions. Following Volvo's recommendations, I also turned off WPS. I have enabled the WPA-PSK/WPA2-PSK AES security type. I don't have the option to choose only WPA2 AES. I can only choose auto and unsecured mode. The car's system recognizes the security set in this way (AES) in the TP-Link device as WPA TKIP and does not allow connection to the network.

None of the advice from this forum has helped so far, I have the current software and the system does not allow me to install anything else, the iPhone 14 pro and the Finevu GX1000cld dashcam connect without any problems with M7200. The Volvo modem works properly - it connects to the Internet after inserting the SIM card or via a hotspot shared by the smartphone. I don't want to use the built-in Volvo modem as an internet source, because there is no power backup and when the car is locked, the Internet is turned off. And I want to have the Internet available to the car's system to use its full features automatically without having to share the hotspot from the smartphone every time. 24/7 access to the network is necessary for the operation of other devices additionally installed in the car, so the car cannot be a hotspot. Can you do anything about it?

  0      
  0      
#1
Options
4 Reply
Re:M7200 and volvo still has a problem with WiFi WPA2 AES
2 weeks ago

 
 

  0  
  0  
#2
Options
Re:M7200 and volvo still has a problem with WiFi WPA2 AES
a week ago

 @TP-Link 

Really @TP-Link has no solution for this? Nobody will help? A product has been released with faulty software and the customer is the one to worry about...

  0  
  0  
#3
Options
Re:M7200 and volvo still has a problem with WiFi WPA2 AES
a week ago

  @LukaszM_PL 

Hi,

Thank you so much for taking the time to post the issue on the TP-Link community!

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID241108928, please check your email box and ensure the support email is well received.

 

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

Many thanks for your great cooperation and patience!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:M7200 and volvo still has a problem with WiFi WPA2 AES
a week ago - last edited Monday
Update failed by firmware 3.0.8 build 231007 Rel. 2n, M7200 V3.0

 

  Hi @Sunshine, thank you for your support. I also wrote an e-mail to technical support, but the only advice I received was to use old solutions on this forum, which is impossible due to blocking by the current software uploading the old version recommended here...
Of course, if I receive effective advice, I will share it here. For now, I'm waiting for a response from the support service.

Regards


Edit1:

At this moment, the technical support engineer recommended installing the beta version of software no. 220812 known here. And this is technically impossible when version 3.0.8 Build 231007 Rel.2n is installed, as I always mention... also the device for return...

 

The most interesting thing is that the software version 3.0.8 Build 231007 Rel.2n on the M7200 support website is only available for the Philippines and United Arab Emirates regions, and I received a router with this software in Poland...

 

Edit2: 

Only on November 7, 2024, TP-Link placed firmware 3.0.8 Build 231007 rel 2n (with a note "_user") on the Polish support website for the M7200 dated 19/08/2024 laugh

static address to the installer M7200(EU)_V3_3.0.8 Build 231007 Rel. 2n_User (does not verify the region)

 

Edit3:

Today, November 11, 2024, I received information from the engineer, that they need to create a new beta version with bug fixes... it has happened before and no one has drawn any conclusions...

  0  
  0  
#5
Options