How to connect deco x50 to poe device
I have 1 deco x50 poe and 1 poe2412g poe switch. How can I connect directly from the modem?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
I am assuming that you are looking to use your 1 Deco X-50-PoE as a router and want to power it with an ethernet cable instead of the power supply?
Theoretically, the following setup should work:
The device you need is a PoE Injector such as:
https://www.tp-link.com/us/business-networking/accessory/tl-poe4818g/
The PoE Injector will need to get plugged into a power outlet next to the modem. It has 2 Ethernet ports, one labeled Data and the other is labeled Data+Power.
Plug the Ethernet cable that comes from the modem into the PoE Injector port labeled Data.
Plug the Ethernet cable going to the Deco X-50-PoE to the PoE Injector port labeled Data+Power.
Hope this helps!
- Copy Link
- Report Inappropriate Content
Hi, both TL-POE4818G and TL-POE2412G are passive POE adapters that can't be used for Deco X50-POE.
You can refer to this link to find a recommended POE injector, such as TL-POE160S
General Questions About the PoE Feature on the Deco X50-PoE
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 95
Replies: 2
Voters 0
No one has voted for it yet.